TIMETRA-ATM-MIB DEFINITIONS ::= BEGIN

IMPORTS
        Integer32, MODULE-IDENTITY,
        OBJECT-TYPE, Counter32, Counter64,
        Unsigned32, NOTIFICATION-TYPE                FROM SNMPv2-SMI

        RowStatus, TimeStamp, TEXTUAL-CONVENTION     FROM SNMPv2-TC

        MODULE-COMPLIANCE, OBJECT-GROUP, 
        NOTIFICATION-GROUP                           FROM SNMPv2-CONF

        ifIndex                                      FROM IF-MIB

        atmInterfaceConfEntry, atmVclEntry, 
        atmVclVpi, atmVclVci, aal5VccEntry,
        atmVplEntry, atmVplVpi,
        atmInterfaceTCAlarmState,
        atmInterfaceDs3PlcpAlarmState,
        atmInterfaceCurrentMaxVpiBits,
        atmInterfaceCurrentMaxVciBits,
        atmInterfaceMaxActiveVpiBits,
        atmInterfaceMaxActiveVciBits,
        atmInterfaceConfVccs,
        atmInterfaceConfVpcs,
        atmInterfaceTCEntry                          FROM ATM-MIB

        AtmVpIdentifier, AtmVcIdentifier,
        AtmConnKind, AtmConnCastType, 
        AtmTrafficDescrParamIndex, 
        AtmVorXAdminStatus, AtmVorXOperStatus,
        AtmVorXLastChange                            FROM ATM-TC-MIB

        timetraSRMIBModules, tmnxSRObjs,
        tmnxSRNotifyPrefix, tmnxSRConfs              FROM TIMETRA-GLOBAL-MIB

        tmnxChassisIndex, tmnxCardSlotNum,
        tmnxMDASlotNum                               FROM TIMETRA-CHASSIS-MIB

        tmnxConnProfId                               FROM TIMETRA-CONN-PROF-MIB;

timetraATMMIBModule MODULE-IDENTITY
        LAST-UPDATED "201102010000Z"
        ORGANIZATION "Alcatel-Lucent"
        CONTACT-INFO
            "Alcatel-Lucent SROS Support
             Web: http://support.alcatel-lucent.com "
        DESCRIPTION
        "This document is the SNMP MIB module to manage and provision ATM 
        functionality for the Alcatel-Lucent SROS device. This includes 
        extensions to the AToM MIB defined in RFC 2515 to allow statistics 
        retrieval as well as extensions to the ILMI link attributes. 

        Copyright 2003-2011 Alcatel-Lucent. All rights reserved.
        Reproduction of this document is authorized on the condition that
        the foregoing copyright notice is included.

        This SNMP MIB module (Specification) embodies Alcatel-Lucent's
        proprietary intellectual property.  Alcatel-Lucent retains
        all title and ownership in the Specification, including any
        revisions.

        Alcatel-Lucent grants all interested parties a non-exclusive
        license to use and distribute an unmodified copy of this
        Specification in connection with management of Alcatel-Lucent
        products, and without fee, provided this copyright notice and
        license appear on all copies.

        This Specification is supplied 'as is', and Alcatel-Lucent
        makes no warranty, either express or implied, as to the use,
        operation, condition, or performance of the Specification."
--
--  Revision History
--
        REVISION        "1102010000Z"
        DESCRIPTION     "Rev 9.0                1 Feb 2011 00:00
                         9.0 release of the TIMETRA-ATM-MIB."

        REVISION        "0902280000Z"
        DESCRIPTION     "Rev 7.0                28 Feb 2009 00:00
                         7.0 release of the TIMETRA-ATM-MIB."

        REVISION        "0603160000Z"   
        DESCRIPTION     "Rev 4.0                16 Mar 2006 00:00
                         4.0 release of the TIMETRA-ATM-MIB."

        REVISION        "0508310000Z"   
        DESCRIPTION     "Rev 3.0                31 Aug 2005 00:00
                         3.0 release of the TIMETRA-ATM-MIB."

        REVISION        "0501240000Z"   
        DESCRIPTION     "Rev 2.1                24 Jan 2005 00:00
                         2.1 release of the TIMETRA-ATM-MIB."

        REVISION        "0310280000Z"
        DESCRIPTION     "Rev 0.1                28 Oct 2003 00:00
                         Initial version of the TIMETRA-ATM-MIB."
                         
        ::= { timetraSRMIBModules 27 }

--%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
--
--  Alcatel-Lucent SROS series ATM extensions
--

tAtmObjs               OBJECT IDENTIFIER ::= { tmnxSRObjs 27 }
tAtmMIBConformance     OBJECT IDENTIFIER ::= { tmnxSRConfs 27 }
tAtmMdaObjs            OBJECT IDENTIFIER ::= { tAtmObjs 1 }
tAtmIntfObjs           OBJECT IDENTIFIER ::= { tAtmObjs 2 }
tAtmVclObjs            OBJECT IDENTIFIER ::= { tAtmObjs 3 }
tAal5VccObjs           OBJECT IDENTIFIER ::= { tAtmObjs 4 }
tAtmTrafficDescObjs    OBJECT IDENTIFIER ::= { tAtmObjs 5 }
tAtmVplObjs            OBJECT IDENTIFIER ::= { tAtmObjs 6 }
tAtmVtlObjs            OBJECT IDENTIFIER ::= { tAtmObjs 7 }
tAtmCellVclObjs        OBJECT IDENTIFIER ::= { tAtmObjs 8 }
tAtmSystemObjs         OBJECT IDENTIFIER ::= { tAtmObjs 9 }
tAtmIlmiLinkObjs       OBJECT IDENTIFIER ::= { tAtmObjs 10 }
tAtmTCSublayerObjs     OBJECT IDENTIFIER ::= { tAtmObjs 11 }
tAtmCpObjs             OBJECT IDENTIFIER ::= { tAtmObjs 12 }

tmnxAtmNotifyPrefix    OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 27 } 
    tAtmNotifications      OBJECT IDENTIFIER ::= { tmnxAtmNotifyPrefix 0 } 


-- --------------------------------------------------------------------
--
--      TIMETRA-ATM-MIB Textual Conventions
--

AtmConnectionOwner ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION     "This texual convention identifies the system entity
                     that owns a specific ATM connection."
    SYNTAX          INTEGER {
                        sap (1),
                        ilmi (2)
                    }                        

AtmOamStatus    ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION     "This texual convention indicates the OAM operational
                     status of ATM connections.  Ete indicates end to end 
                     connection. Ais denotes alarm indication signal and Rdi 
                     is for remote defect indication.  Loc indicates the 
                     alarm was due to loss of continuity."
    SYNTAX          INTEGER {
                        up (1),
                        eteAis (2),
                        eteRdi (3),
                        eteAisLoc (4)
                    }      

AtmIlmiStatus    ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION     "This textual convention indicates the ILMI status of 
                     the VCL or VPL.  If through ILMI an operational condition 
                     or misconfiguration has been detected, tAtmVclInfoIlmiStatus 
                     or tAtmVplInfoIlmiStatus will reflect this condition."
    SYNTAX           INTEGER {
                        undefined (0),
                        ok (1),
                        vpiOrVciRangeConflict (2)
                     }   

AtmLlid          ::= TEXTUAL-CONVENTION
    STATUS           current
    DESCRIPTION      "This texual convention is the 16 octets that 
                      identifies the system Loopback location Id (LLID). As 
                      required by the ATM OAM Loopback capability. This 
                      texual convention is defined in ITU-T standard I.610."
    SYNTAX           OCTET STRING (SIZE(16))

AtmIlmiLinkUniType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "AtmIlmiLinkUniType is an enumerated integer whose value indicates
         ATM UNI type."
    SYNTAX  INTEGER {
                undefined (0),
                public (1),
                private (2)
            }

AtmIlmiLinkDeviceType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "AtmIlmiLinkDeviceType is an enumerated integer whose value indicates
         the advertised device type."
    SYNTAX  INTEGER {
                undefined(0),
                user(1),
                node(2)
            }

AtmIlmiLinkVersion ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "AtmIlmiLinkVersion is an enumerated integer whose value
         indicates the ILMI version of either `3.0', `3.1' or `4.0' 
         that is advertised by IME."

    SYNTAX  INTEGER {
                undefined(0),
                version3point1(1),
                version4point0(2),
                version3point0(3)
            }

AtmIlmiLinkImeType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "AtmIlmiLinkImeType is an enumerated integer whose value
         indicates the ILMI IME type of either `User-Side' or
         `Network-Side'."
    SYNTAX  INTEGER {
                userside(1),
                networkside(2)
            }

--
--
-- Alcatel-Lucent SROS series ATM MDA Statistics Table
--
tAtmMdaInfoTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF TAtmMdaInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION   
        "The tAtmMdaInfoTable contains ATM MDA status information.

         This table is obsoleted in release 3.0."
    ::= { tAtmMdaObjs 1 }
    
tAtmMdaInfoEntry  OBJECT-TYPE
        SYNTAX          TAtmMdaInfoEntry
        MAX-ACCESS      not-accessible  
        STATUS          obsolete
        DESCRIPTION
            "An entry in the tAtmMdaInfoEntry containing status
             information applicable to an ATM MDA.

             This entry is obsoleted in release 3.0."
        INDEX   { tmnxChassisIndex, tmnxCardSlotNum, tmnxMDASlotNum }  
        ::= { tAtmMdaInfoTable 1 }

    TAtmMdaInfoEntry ::=
        SEQUENCE {
          tAtmMdaMaxSupportedVpcs                   INTEGER,
          tAtmMdaMaxSupportedVccs                   INTEGER,
          tAtmMdaConfiguredVpcs                     INTEGER,
          tAtmMdaConfiguredVccs                     INTEGER
        }
           
    tAtmMdaMaxSupportedVpcs OBJECT-TYPE
        SYNTAX       INTEGER 
        MAX-ACCESS   read-only
        STATUS       obsolete
        DESCRIPTION
           "The value of tAtmMdaMaxSupportedVpcs indicates the 
            maximum number of ATM VPCs that can be configured 
            on this MDA.

            This object is obsoleted in release 3.0."
    ::= { tAtmMdaInfoEntry 1 }

    tAtmMdaMaxSupportedVccs OBJECT-TYPE
        SYNTAX       INTEGER 
        MAX-ACCESS   read-only
        STATUS       obsolete
        DESCRIPTION
           "The value of tAtmMdaMaxSupportedVccs indicates the 
            maximum number of ATM VCCs that can be configured 
            on this MDA.

            This object is obsoleted in release 3.0."
    ::= { tAtmMdaInfoEntry 2 }

    tAtmMdaConfiguredVpcs OBJECT-TYPE
        SYNTAX       INTEGER 
        MAX-ACCESS   read-only
        STATUS       obsolete
        DESCRIPTION
           "The value of tAtmMdaConfiguredVpcs indicates the number 
            of ATM VPCs that have been configured on this MDA.

            This object is obsoleted in release 3.0."
    ::= { tAtmMdaInfoEntry 3 }

    tAtmMdaConfiguredVccs OBJECT-TYPE
        SYNTAX       INTEGER 
        MAX-ACCESS   read-only
        STATUS       obsolete
        DESCRIPTION
           "The value of tAtmMdaConfiguredVccs indicates the number
            of ATM VCCs that have been configured on this MDA.

            This object is obsoleted in release 3.0."
    ::= { tAtmMdaInfoEntry 4 }

--
-- Alcatel-Lucent SROS series ATM Interface Configuration Table
--
--  Augmententation of atmInterfaceConfTable in ATM-MIB
--
--  The tAtmIntfConfTable is an augmentation of the atmInterfaceConfTable.
--  Use of AUGMENTS clause implies a one-to-one dependent relationship between
--  the base table, atmInterfaceConfTable, and the augmenting table, 
--  tAtmIntfConfTable. This in effect extends the atmInterfaceConfTable
--  with additional columns.  Creation (or deletion) of a row in the
--  atmInterfaceConfTable results in the same fate for the row in the
--  tAtmIntfConfTable

tAtmIntfConfTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF TAtmIntfConfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   
        "The tAtmIntfConfTable contains ATM interface configuration 
         and status not included in the AToM MIB definition in RFC 2515."
    ::= { tAtmIntfObjs 1 }

    tAtmIntfConfEntry  OBJECT-TYPE
        SYNTAX          TAtmIntfConfEntry
        MAX-ACCESS      not-accessible  
        STATUS          current
        DESCRIPTION
            "An entry in the tAtmIntfConfEntry containing additional 
             configuration and status information applicable to an ATM 
             interface."
        AUGMENTS { atmInterfaceConfEntry }
    ::= { tAtmIntfConfTable 1 }

    TAtmIntfConfEntry ::=
        SEQUENCE {
            tAtmIntfCurrentMaxVpcs              INTEGER,
            tAtmIntfCurrentMaxVccs              INTEGER,
            tAtmIntfTotalIngrCbrBandwidth       Unsigned32,
            tAtmIntfTotalIngrRtVbrBandwidth     Unsigned32,
            tAtmIntfTotalIngrNrtVbrBandwidth    Unsigned32,
            tAtmIntfTotalIngrUbrBandwidth       Unsigned32,
            tAtmIntfTotalEgrCbrBandwidth        Unsigned32,
            tAtmIntfTotalEgrRtVbrBandwidth      Unsigned32,
            tAtmIntfTotalEgrNrtVbrBandwidth     Unsigned32,
            tAtmIntfTotalEgrUbrBandwidth        Unsigned32,
            tAtmIntfBandwidth                   Unsigned32,
            tAtmIntfShapedBandwidth             Unsigned32,
            tAtmIntfLastUnknVpi                 AtmVpIdentifier,
            tAtmIntfLastUnknVci                 AtmVcIdentifier,
            tAtmIntfOperStatus                  INTEGER,
            tAtmIntfConfVtcs                    INTEGER,
            tAtmIntfConfIfcs                    INTEGER            
        }

    tAtmIntfCurrentMaxVpcs OBJECT-TYPE
        SYNTAX         INTEGER  (0..1024)
        MAX-ACCESS     read-only
        STATUS         current 
        DESCRIPTION
           "The value of tAtmIntfCurrentMaxVpcs indicates 
            the maximum number of VPCs that may be currently
            configured on this ATM interface. 
            The value is the minimum of atmInterfaceMaxVpcs, 
            and the atmInterfaceMaxVpcs of the interface's 
            UNI/NNI peer as negotiated by ILMI.

            If the interface does not negotiate with its peer
            to determine the number of VPCs that can be
            configured on the interface, then the value of
            this object must equal atmInterfaceMaxVpcs."
    ::= { tAtmIntfConfEntry 1 }

    tAtmIntfCurrentMaxVccs OBJECT-TYPE
        SYNTAX         INTEGER  (0..65536)
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
           "The value of tAtmIntfCurrentMaxVccs indicates
            the maximum number of VCCs that may be currently
            supported on this ATM interface.
            The value is the minimum of atmInterfaceMaxVccs,
            and the atmInterfaceMaxVccs of the interface's
            UNI/NNI peer as negotiated by ILMI.

            If the interface does not negotiate with its peer
            to determine the number of VCCs that can be
            configured on the interface, then the value of
            this object must equal atmInterfaceMaxVccs."
    ::= { tAtmIntfConfEntry 2 }

    tAtmIntfTotalIngrCbrBandwidth OBJECT-TYPE
        SYNTAX       Unsigned32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfTotalIngrCbrBandwidth
            indicates the total Cbr bandwidth consumed on this 
            interface in the ingress direction."
    ::= { tAtmIntfConfEntry 3 }
    
    tAtmIntfTotalIngrRtVbrBandwidth OBJECT-TYPE
        SYNTAX       Unsigned32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfTotalIngrRtVbrBandwidth
            indicates the total rtVbr bandwidth consumed on this 
            interface in the ingress direction."
    ::= { tAtmIntfConfEntry 4 }
    
    tAtmIntfTotalIngrNrtVbrBandwidth OBJECT-TYPE
        SYNTAX       Unsigned32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfTotalIngrNrtVbrBandwidth
            indicates the total nrtVbr bandwidth consumed on this 
            interface in the ingress direction."
    ::= { tAtmIntfConfEntry 5 }
    
    tAtmIntfTotalIngrUbrBandwidth OBJECT-TYPE
        SYNTAX       Unsigned32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfTotalIngrUbrBandwidth
            indicates the total Ubr bandwidth consumed on this 
            interface in the ingress direction."
    ::= { tAtmIntfConfEntry 6 }

      tAtmIntfTotalEgrCbrBandwidth OBJECT-TYPE
        SYNTAX       Unsigned32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfTotalEgrCbrBandwidth
            indicates the total Cbr bandwidth consumed on this 
            interface in the egress direction."
    ::= { tAtmIntfConfEntry 7 }
    
    tAtmIntfTotalEgrRtVbrBandwidth OBJECT-TYPE
        SYNTAX       Unsigned32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfTotalEgrRtVbrBandwidth
            indicates tje total rtVbr bandwidth consumed on this 
            interface in the egress direction."
    ::= { tAtmIntfConfEntry 8 }
    
    tAtmIntfTotalEgrNrtVbrBandwidth OBJECT-TYPE
        SYNTAX       Unsigned32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfTotalEgrNrtVbrBandwidth
            indicates the total nrtVbr bandwidth consumed on this 
            interface in the egress direction."
    ::= { tAtmIntfConfEntry 9 }
    
    tAtmIntfTotalEgrUbrBandwidth OBJECT-TYPE
        SYNTAX       Unsigned32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfTotalEgrUbrBandwidth
            indicates the total Ubr bandwidth consumed on this 
            interface in the egress direction."
    ::= { tAtmIntfConfEntry 10 }

    tAtmIntfBandwidth OBJECT-TYPE
        SYNTAX       Unsigned32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfBandwidth indicates the 
            total ATM link bandwidth accepted on this interface."
    ::= { tAtmIntfConfEntry 11 }

    tAtmIntfShapedBandwidth OBJECT-TYPE
        SYNTAX       Unsigned32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfShapedBandwidth indicates 
            the total shaped bandwidth consumed on this 
            interface in the egress direction."
    ::= { tAtmIntfConfEntry 12 }

    tAtmIntfLastUnknVpi OBJECT-TYPE
        SYNTAX       AtmVpIdentifier
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfLastUnknVpi indicates
            the last unknown Vpi that was received on
            this interface."
    ::= { tAtmIntfConfEntry 13 }

    tAtmIntfLastUnknVci OBJECT-TYPE
        SYNTAX       AtmVcIdentifier
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfLastUnknVci indicates the 
            last unknown vci that was received on this interface."
    ::= { tAtmIntfConfEntry 14 }
    
    tAtmIntfOperStatus OBJECT-TYPE
        SYNTAX         INTEGER {
                           up(1),
                           lowerLayerDown(2)
                       }
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
           "The value of tAtmIntfOperStatus 
            indicates the status of the ATM interface.
            If the SONET-PATH layer and TC Sublayer are
            operationally up, the ATM Interface is 
            considered up. If the SONET-PATH layer and/or
            TC Sublayer is down, the ATM Interface is set
            to lowerLayerDown."
    ::= { tAtmIntfConfEntry 15 }

    tAtmIntfConfVtcs  OBJECT-TYPE
        SYNTAX         INTEGER  (0..1024)
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
           "The value of tAtmIntfConfVtcs indicates the
            number of VTCs currently in use at this ATM interface."
    ::= { tAtmIntfConfEntry 16 }

    tAtmIntfConfIfcs  OBJECT-TYPE
        SYNTAX         INTEGER  (0..1)
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
           "The value of tAtmIntfConfIfcs indicates the 
            number of IFCs currently in use at this ATM interface."
    ::= { tAtmIntfConfEntry 17 }    

--
-- Alcatel-Lucent SROS series ATM Interface Stats Table
--
-- The following table maps specific parameters of the ifTable 
-- for the ATM Layer.
-- Note that the ifTable returns these values for the 
-- ifType of SONET where the physical, ATM and AAL5 layer
-- are mixed.
-- The follwing mapping can be applied:
-- ifInOctets      - tAtmIntfStatsTotalBytesRxd
-- ifOutOctets     - tAtmIntfStatsTotalBytesTxd
-- ifUnknProtos    - tAtmIntfStatsTotalUnknCellsDrp
-- ifInErr         - tAtmTCSublayerHecErrors

tAtmIntfStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF TAtmIntfStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   
        "The tAtmIntfStatsTable contains ATM interface stats  
         at the ATM Layer."
    ::= { tAtmIntfObjs 2 }
    
tAtmIntfStatsEntry  OBJECT-TYPE
        SYNTAX          TAtmIntfStatsEntry
        MAX-ACCESS      not-accessible  
        STATUS          current
        DESCRIPTION
            "An entry in the tAtmIntfStatsEntry containing statistics 
             information applicable to an ATM interface."
        INDEX { ifIndex }
        ::= { tAtmIntfStatsTable 1 }

    TAtmIntfStatsEntry ::=
        SEQUENCE {
          tAtmIntfStatsTotalCellsRxd            Counter64,
          tAtmIntfStatsTotalCellsTxd            Counter64,
          tAtmIntfStatsTotalBytesRxd            Counter64,
          tAtmIntfStatsTotalBytesTxd            Counter64,
          tAtmIntfStatsTotalUnknCellsDrp        Counter32,
          tAtmIntfStatsTotalHecErr              Counter32,
          tAtmIntfStatsTotalHecErrFixed         Counter32
        }
           
    tAtmIntfStatsTotalCellsRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfStatsTotalCellsRxd indicates 
            the number of valid ATM cells received by the ATM 
            interface including both CLP=0 and CLP=1 cells.  
            If traffic policing is implemented, then cells 
            are counted prior to the application of traffic 
            policing."
    ::= { tAtmIntfStatsEntry 1 }

    tAtmIntfStatsTotalCellsTxd OBJECT-TYPE
        SYNTAX       Counter64
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfStatsTotalCellsTxd indicates 
            the number of valid ATM cells transmitted by the ATM
            interface including both CLP=0 and CLP=1 cells."
    ::= { tAtmIntfStatsEntry 2 }

    tAtmIntfStatsTotalBytesRxd OBJECT-TYPE
        SYNTAX       Counter64
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfStatsTotalBytesRxd 
            indicates the number of bytes received on this
            interface. This is the number of 
            tAtmIntfStatsTotalCellsRxd multiplied by 53."
    ::= { tAtmIntfStatsEntry 3 }
    
    tAtmIntfStatsTotalBytesTxd OBJECT-TYPE
        SYNTAX       Counter64
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION        
           "The value of tAtmIntfStatsTotalBytesTxd 
            indicates the number of bytes transmitted 
            on this interface. This is the number of 
            tAtmIntfStatsTotalCellsTxd multiplied by 53."
    ::= { tAtmIntfStatsEntry 4 }
     
    tAtmIntfStatsTotalUnknCellsDrp OBJECT-TYPE
        SYNTAX       Counter32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfStatsTotalUnknCellsDrp
            indicates the number of cells dropped due to an 
            unknown VPI/VCI."
    ::= { tAtmIntfStatsEntry 5 } 
     
     tAtmIntfStatsTotalHecErr OBJECT-TYPE
        SYNTAX       Counter32
        MAX-ACCESS   read-only
        STATUS       obsolete
        DESCRIPTION
           "The value of tAtmIntfStatsTotalHecErr
            indicates the number of cells with uncorrectable 
            HEC Errors on this interface."
    ::= { tAtmIntfStatsEntry 6 }
    
     tAtmIntfStatsTotalHecErrFixed OBJECT-TYPE
        SYNTAX       Counter32
        MAX-ACCESS   read-only
        STATUS       obsolete
        DESCRIPTION
           "The value of tAtmIntfStatsTotalHecErrFixed
            indicates the number of cells with correctable HEC
            Errors on this interface."
    ::= { tAtmIntfStatsEntry 7 }

--
-- Alcatel-Lucent SROS series ATM Interface AAL5 Stats Table
--
-- The following table maps specific parameters of the ifTable 
-- for the AAL5 Layer.
-- Note that the ifTable returns these values for the 
-- ifType of SONET where the physical, ATM and AAL5 layer
-- are mixed.
-- The follwing mapping can be applied:
-- ifInUcastPkts      - tAtmIntfAal5StatsTotalPktsRxd
-- ifOutUcastPkts     - tAtmIntfAal5StatsTotalPktsTxd
-- ifInDiscards       - tAtmIntfAal5StatsTotalPktsDrpRxd
-- ifOutDiscards      - tAtmIntfAal5StatsTotalPktsDrpTxd

tAtmIntfAal5StatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF TAtmIntfAal5StatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   
        "The tAtmIntfAal5StatsTable contains ATM interface stats  
         at the AAL5 Layer."
    ::= { tAtmIntfObjs 3 }
    
tAtmIntfAal5StatsEntry  OBJECT-TYPE
        SYNTAX          TAtmIntfAal5StatsEntry
        MAX-ACCESS      not-accessible  
        STATUS          current
        DESCRIPTION
            "An entry in the tAtmIntfAal5StatsEntry containing statistics 
             information applicable to an ATM interface at the AAL5 Layer."
        INDEX { ifIndex }
        ::= { tAtmIntfAal5StatsTable 1 }

    TAtmIntfAal5StatsEntry ::=
        SEQUENCE {
          tAtmIntfAal5StatsTotalPktsRxd         Counter64,
          tAtmIntfAal5StatsTotalPktsTxd         Counter64,
          tAtmIntfAal5StatsTotalPktsDrpRxd      Counter64,
          tAtmIntfAal5StatsTotalPktsDrpTxd      Counter64,
          tAtmIntfAal5StatsTotalCrc32Err        Counter64          
        }
        
    tAtmIntfAal5StatsTotalPktsRxd OBJECT-TYPE
        SYNTAX       Counter64
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfAal5StatsTotalPktsRxd 
            indicates the number of AAL5 PDUs that are received 
            by the ATM interface."
    ::= { tAtmIntfAal5StatsEntry 1 }
    
    tAtmIntfAal5StatsTotalPktsTxd OBJECT-TYPE
        SYNTAX       Counter64
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfAal5StatsTotalPktsTxd 
            indicates the number of AAL5 PDUs that are transmitted
            by the ATM interface."
    ::= { tAtmIntfAal5StatsEntry 2 }

    tAtmIntfAal5StatsTotalPktsDrpRxd OBJECT-TYPE
        SYNTAX       Counter64
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfAal5StatsTotalPktsDrpRxd 
            indicates the number of AAL5 PDUs dropped by the 
            ATM interface in the receive direction. This count does
            not include crc32 Errors or oversized SDU discards"
    ::= { tAtmIntfAal5StatsEntry 3 }
    
    tAtmIntfAal5StatsTotalPktsDrpTxd OBJECT-TYPE
        SYNTAX       Counter64
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfAal5StatsTotalPktsDrpTxd 
            indicates the number of AAL5 PDUs dropped in the 
            transmit direction. This count does
            not include crc32 Errors or oversized SDU discards."
    ::= { tAtmIntfAal5StatsEntry 4 }

    tAtmIntfAal5StatsTotalCrc32Err OBJECT-TYPE
        SYNTAX       Counter64
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIntfAal5StatsTotalCrc32Err
            indicates the number of Errors detected by the 32 
            bit cyclic redundancy check."
    ::= { tAtmIntfAal5StatsEntry 5 }    

--
-- Alcatel-Lucent SROS series ATM Interface Connection Info Table
--
-- The following table contains configuration and status information for 
-- ATM interface-Level Connections (IFCs). Interface-Level Connections
-- is a connection at port level, such that the entire port is reserved
-- for this connection. The term 'port' refers to either a physical
-- port, or a channel on a channelized port.

tAtmIfcInfoTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF TAtmIfcInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   
        "The tAtmIfcInfoTable contains configuration and status information 
        for ATM interface-level connections."
    ::= { tAtmIntfObjs 4 }
    
tAtmIfcInfoEntry  OBJECT-TYPE
        SYNTAX          TAtmIfcInfoEntry
        MAX-ACCESS      not-accessible  
        STATUS          current
        DESCRIPTION
            "An entry in the tAtmIfcInfoTable containing configuration and 
             status information applicable to ATM interface-level 
             connections."
        INDEX { ifIndex }
        ::= { tAtmIfcInfoTable 1 }

    TAtmIfcInfoEntry ::=
        SEQUENCE {
            tAtmIfcAdminStatus                  AtmVorXAdminStatus,
            tAtmIfcOperStatus                   AtmVorXOperStatus,
            tAtmIfcLastChange                   AtmVorXLastChange,
            tAtmIfcReceiveTrafficDescrIndex     AtmTrafficDescrParamIndex,
            tAtmIfcTransmitTrafficDescrIndex    AtmTrafficDescrParamIndex,
            tAtmIfcRowStatus                    RowStatus,            
            tAtmIfcCastType                     AtmConnCastType,
            tAtmIfcConnKind                     AtmConnKind,        
            tAtmIfcInfoOwner                    AtmConnectionOwner                
        }

    tAtmIfcAdminStatus  OBJECT-TYPE
        SYNTAX          AtmVorXAdminStatus
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmIfcAdminStatus specifies the desired administrative state 
            of the IFC."
        ::= { tAtmIfcInfoEntry 1 }

    tAtmIfcOperStatus   OBJECT-TYPE
        SYNTAX          AtmVorXOperStatus
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmIfcOperStatus indicates the current operational status of 
            the IFC."
        ::= { tAtmIfcInfoEntry 2 }

    tAtmIfcLastChange   OBJECT-TYPE
        SYNTAX          AtmVorXLastChange
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmIfcLastChange indicates the value of sysUpTime at the 
            time this IFC entered its current operational state."
        ::= { tAtmIfcInfoEntry 3 }

    tAtmIfcReceiveTrafficDescrIndex  OBJECT-TYPE
        SYNTAX          AtmTrafficDescrParamIndex
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmIfcReceiveTrafficDescrIndex identifies the row
            in the atmTrafficDescrParamTable which
            applies to the receive direction of the IFC."
        ::= { tAtmIfcInfoEntry 4 }

    tAtmIfcTransmitTrafficDescrIndex  OBJECT-TYPE
        SYNTAX          AtmTrafficDescrParamIndex
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmIfcTransmitTrafficDescrIndex identifies the row
            in the atmTrafficDescrParamTable which
            applies to the transmit direction of the IFC."
        ::= { tAtmIfcInfoEntry 5 }

    tAtmIfcRowStatus    OBJECT-TYPE
        SYNTAX          RowStatus
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmIfcRowStatus indicates the current RowStatus of the IFC.
            Entries in the tAtmIfcInfoTable are created as a result of
            the creation of another system entity (such as a SAP). 
            Since entries in this table can not be created directly,
            tAtmIfcRowStatus is read-only and will always be 'active'
            if the row exists."
        ::= { tAtmIfcInfoEntry 6 }        

    tAtmIfcCastType     OBJECT-TYPE
        SYNTAX          AtmConnCastType
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmIfcCastType indicates the connection topology type."
        ::= { tAtmIfcInfoEntry 7 }

    tAtmIfcConnKind     OBJECT-TYPE
        SYNTAX          AtmConnKind
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "The value of tAtmIfcConnKind indicates the use of call control."
        ::= { tAtmIfcInfoEntry 8 }

    tAtmIfcInfoOwner OBJECT-TYPE
        SYNTAX       AtmConnectionOwner
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIfcInfoOwner indicates which application
            caused the creation of the ATM interface-level connection."
        ::= { tAtmIfcInfoEntry 9 }   

--
--  Alcatel-Lucent SROS series ATM IFC Statistics Table
--

tAtmIfcStatisticsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF TAtmIfcStatisticsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The tAtmIfcStatisticsTable is used to gather cell-level 
         statistics on a particular IFC entry."
    ::= { tAtmIntfObjs 5 }
    
    tAtmIfcStatisticsEntry OBJECT-TYPE
        SYNTAX        TAtmIfcStatisticsEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION 
            "An entry in the tAtmIfcStatisticsTable containing statistics 
             information applicable to a particular IFC entry."
        INDEX  { ifIndex }
        ::= { tAtmIfcStatisticsTable 1 }
    
    TAtmIfcStatisticsEntry ::=
        SEQUENCE {
           tAtmIfcStatsTotalCellsRxd       Counter64,
           tAtmIfcStatsTotalClp0CellsRxd   Counter64,
           tAtmIfcStatsTotalCellsTxd       Counter64,
           tAtmIfcStatsTotalClp0CellsTxd   Counter64,
           tAtmIfcStatsTotalBytesRxd       Counter64,           
           tAtmIfcStatsTotalBytesTxd       Counter64,
           tAtmIfcStatsDrpCellsRxd         Counter32,
           tAtmIfcStatsDrpClp0CellsRxd     Counter32,
           tAtmIfcStatsDrpClp0CellsTxd     Counter32,
           tAtmIfcStatsTagCells            Counter32
        }

    tAtmIfcStatsTotalCellsRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIfcStatsTotalCellsRxd indicates the 
            number of valid ATM cells received by the 
            IFC including both CLP=0 and CLP=1 cells.  
            If traffic policing is implemented, then cells are counted 
            prior to the application of traffic policing."
        ::= { tAtmIfcStatisticsEntry 1 }      

    tAtmIfcStatsTotalClp0CellsRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIfcStatsTotalClp0CellsRxd indicates the 
            number of valid ATM CLP=0 cells received by the IFC.
            If traffic policing is implemented, then cells are counted 
            prior to the application of traffic policing."
        ::= { tAtmIfcStatisticsEntry 2 } 
        
    tAtmIfcStatsTotalCellsTxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIfcStatsTotalCellsTxd indicates the 
            number of valid ATM cells transmitted by the 
            IFC including both CLP=0 and CLP=1 cells.  
            If traffic policing is implemented, then cells are counted 
            prior to the application of traffic policing."
        ::= { tAtmIfcStatisticsEntry 3 }    

    tAtmIfcStatsTotalClp0CellsTxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIfcStatsTotalClp0CellsTxd indicates the 
            number of valid ATM CLP=0 cells transmitted by the IFC.
            If traffic policing is implemented, then cells are counted 
            prior to the application of traffic policing."
        ::= { tAtmIfcStatisticsEntry 4 }

    tAtmIfcStatsTotalBytesRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIfcStatsTotalBytesRxd indicates the number of 
            bytes received by this IFC. This is the number of 
            tAtmIfcStatsTotalCellsRxd multiplied by 53."
        ::= { tAtmIfcStatisticsEntry 5 }

    tAtmIfcStatsTotalBytesTxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIfcStatsTotalBytesTxd indicates the number of 
            bytes transmitted by this IFC. This is the number of 
            tAtmIfcStatsTotalCellsTxd multiplied by 53."
        ::= { tAtmIfcStatisticsEntry 6 } 

    tAtmIfcStatsDrpCellsRxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIfcStatsDrpCellsRxd indicates the 
            number of all policer cells discards (CLP=0+1) of the IFC. 
            This excludes any buffer management discards (if 
            applicable)." 
        ::= { tAtmIfcStatisticsEntry 7 } 

    tAtmIfcStatsDrpClp0CellsRxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIfcStatsDrpClp0CellsRxd indicates the 
            number of all policer CLP=0 cells discards of the IFC. This 
            excludes any buffer management discards (if applicable)." 
        ::= { tAtmIfcStatisticsEntry 8 } 

    tAtmIfcStatsDrpClp0CellsTxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIfcStatsDrpClp0CellsTxd indicates the 
            number of all CLP=0 cells discards of this IFC. This includes 
            both discards due to buffer management and policer."
        ::= { tAtmIfcStatisticsEntry 9 } 

    tAtmIfcStatsTagCells OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIfcStatsTagCells indicates the 
            number of tagged CLP=0 cells of the IFC. The egress may or 
            may not discard these cells."
        ::= { tAtmIfcStatisticsEntry 10 }

--
--  Alcatel-Lucent SROS series ATM VCL Info Table
--
--  Augmententation of atmVclTable in ATM-MIB
--
--  The tAtmVclInfoTable is an augmentation of the atmVclTable.
--  Use of AUGMENTS clause implies a one-to-one dependent relationship between
--  the base table, atmVclTable, and the augmenting table, tAtmVclInfoTable. 
--  This in effect extends the atmVclTable with additional columns.  
--  Creation (or deletion) of a row in the atmVclTable results in the same 
--  fate for the row in the tAtmVclInfoTable

tAtmVclInfoTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF TAtmVclInfoEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The tAtmVclInfoTable is used to display non-configuration
         information on a particular VCL entry in the RFC 2515 AToM MIB."
    ::= { tAtmVclObjs 1 }
    
    tAtmVclInfoEntry OBJECT-TYPE
        SYNTAX        TAtmVclInfoEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION 
            "An entry in the tAtmVclInfoTable containing non-configuration
             information applicable to a particular VCL entry in the 
             AToM MIB."
        AUGMENTS { atmVclEntry }
        ::= { tAtmVclInfoTable 1 }
    
    TAtmVclInfoEntry ::=
        SEQUENCE {
           tAtmVclInfoOwner         AtmConnectionOwner,
           tAtmVclInfoOamStatus     AtmOamStatus,
           tAtmVclInfoIlmiStatus    AtmIlmiStatus,           
           tAtmVclInfoRxTrafficDescrIdOvr
                                    AtmTrafficDescrParamIndex,
           tAtmVclInfoTxTrafficDescrIdOvr
                                    AtmTrafficDescrParamIndex
       }

    tAtmVclInfoOwner OBJECT-TYPE
        SYNTAX       AtmConnectionOwner
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVclInfoOwner indicates which application
            caused the creation of the ATM VCL."
        ::= { tAtmVclInfoEntry 1 }   

    tAtmVclInfoOamStatus OBJECT-TYPE
        SYNTAX       AtmOamStatus
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVclInfoOamStatus indicates the OAM operational
            status of the VCL."
        ::= { tAtmVclInfoEntry 2 }   

    tAtmVclInfoIlmiStatus OBJECT-TYPE
        SYNTAX       AtmIlmiStatus   
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVclInfoIlmiStatus indicates the ILMI status of 
            the VCL. "
        ::= { tAtmVclInfoEntry 3 }    

    tAtmVclInfoRxTrafficDescrIdOvr OBJECT-TYPE
        SYNTAX       AtmTrafficDescrParamIndex(0|1..1000)
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION  "This object indicates the index of the ATM 
                      ingress traffic descriptor override.
                      
                      This override value is given by an AAA server 
                      such as a RADIUS server.
                      
                      The value zero indicates that no override is given."
        ::= { tAtmVclInfoEntry 4 }

    tAtmVclInfoTxTrafficDescrIdOvr OBJECT-TYPE
        SYNTAX       AtmTrafficDescrParamIndex(0|1..1000)
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION  "This object indicates the index of the ATM 
                      egress traffic descriptor override.
                      
                      This override value is given by an AAA server 
                      such as a RADIUS server.
                      
                      The value zero indicates that no override is given."
        ::= { tAtmVclInfoEntry 5 }

--
--  Alcatel-Lucent SROS series ATM VCL Statistics Table
--

tAtmVclStatisticsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF TAtmVclStatisticsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The tAtmVclStatisticsTable is used to gather cell-level 
         statistics on a particular VCL entry in the RFC 2515 AToM MIB."
    ::= { tAtmVclObjs 2 }
    
    tAtmVclStatisticsEntry OBJECT-TYPE
        SYNTAX        TAtmVclStatisticsEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION 
            "An entry in the tAtmVclStatisticsTable containing statistics 
             information applicable to a particular VCL entry in the 
             AToM MIB."
        INDEX  { ifIndex, atmVclVpi, atmVclVci }
        ::= { tAtmVclStatisticsTable 1 }
    
    TAtmVclStatisticsEntry ::=
        SEQUENCE {
           tAtmVclStatsTotalCellsRxd Counter64,
           tAtmVclStatsTotalCellsTxd Counter64,
           tAtmVclStatsTotalBytesRxd Counter64,
           tAtmVclStatsTotalBytesTxd Counter64
           
        }

    tAtmVclStatsTotalCellsRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVclStatsTotalCellsRxd indicates the 
            number of valid ATM cells received by the 
            VCL including both CLP=0 and CLP=1 cells.  
            If traffic policing is implemented, then cells are counted 
            prior to the application of traffic policing."
        ::= { tAtmVclStatisticsEntry 1 }      

    tAtmVclStatsTotalCellsTxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVclStatsTotalCellsTxd indicates the 
            number of valid ATM cells transmitted by the 
            VCL including both CLP=0 and CLP=1 cells.  
            If traffic policing is implemented, then cells are counted 
            prior to the application of traffic policing."
        ::= { tAtmVclStatisticsEntry 2 }    

    tAtmVclStatsTotalBytesRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVclStatsTotalBytesRxd indicates the number of 
            bytes received by this Vcl. This is the number of 
            tAtmVclStatsTotalCellsRxd multiplied by 53."
        ::= { tAtmVclStatisticsEntry 3 }

    tAtmVclStatsTotalBytesTxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVclStatsTotalBytesTxd indicates the number of 
            bytes transmitted by this Vcl. This is the number of 
            tAtmVclStatsTotalCellsTxd multiplied by 53."
        ::= { tAtmVclStatisticsEntry 4 } 
        
tAtmOamVclStatisticsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF TAtmOamVclStatisticsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The tAtmOamVclStatisticsTable is used to gather oam 
         statistics on a particular VCL entry in the RFC 2515 AToM MIB."
    ::= { tAtmVclObjs 3 }
    
    tAtmOamVclStatisticsEntry OBJECT-TYPE
        SYNTAX        TAtmOamVclStatisticsEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION 
            "An entry in the tAtmVclStatisticsTable containing statistics 
             information applicable to a particular VCL entry in the 
             AToM MIB."
        AUGMENTS  { atmVclEntry }
        ::= { tAtmOamVclStatisticsTable 1 }
    
    TAtmOamVclStatisticsEntry ::=
        SEQUENCE {
           tAtmOamVclStatsAISCellsTxd      Counter32,
           tAtmOamVclStatsRDICellsTxd      Counter32,
           tAtmOamVclStatsLoopbackCellsTxd Counter32,
           tAtmOamVclStatsAISCellsRxd      Counter32,
           tAtmOamVclStatsRDICellsRxd      Counter32,
           tAtmOamVclStatsLoopbackCellsRxd Counter32,
           tAtmOamVclStatsCrc10Err         Counter32,
           tAtmOamVclStatsOtherCellsRxd    Counter32
        }
     
   tAtmOamVclStatsAISCellsTxd OBJECT-TYPE
        SYNTAX       Counter32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmOamVclStatsAISCellsTxd indicates the 
            number of AIS cells transmitted on this VC for 
            both end to end and segment."
        ::= { tAtmOamVclStatisticsEntry 1 }      
   
   tAtmOamVclStatsRDICellsTxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmOamVclStatsRDICellsTxd indicates the 
            number of RDI cells transmitted on this VC for 
            both end to end and segment."
        ::= { tAtmOamVclStatisticsEntry 2 }         
        
   tAtmOamVclStatsLoopbackCellsTxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmOamVclStatsLoopbackCellsTxd indicates
            the number of loopback requests and responses transmitted 
            on this VC for both end to end and segment."
        ::= { tAtmOamVclStatisticsEntry 3 }  

   tAtmOamVclStatsAISCellsRxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmOamVclStatsAISCellsRxd indicates the 
            number of AIS cells received on this VC for 
            both end to end and segment."
        ::= { tAtmOamVclStatisticsEntry 4 }      
   
   tAtmOamVclStatsRDICellsRxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmOamVclStatsRDICellsRxd indicates the 
            number of RDI cells received on this VC for 
            both end to end and segment."
        ::= { tAtmOamVclStatisticsEntry 5 }         
        
   tAtmOamVclStatsLoopbackCellsRxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmOamVclStatsLoopbackCellsRxd indicates
            the number of loopback requests and responses received 
            on this VC for both end to end and segment."
        ::= { tAtmOamVclStatisticsEntry 6 }  
   
   tAtmOamVclStatsCrc10Err OBJECT-TYPE
        SYNTAX       Counter32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmOamVclStatsCrc10Err indicates 
            the number of oam cells discarded with CRC 10 Errors."
        ::= { tAtmOamVclStatisticsEntry 7 }  

   tAtmOamVclStatsOtherCellsRxd OBJECT-TYPE
        SYNTAX       Counter32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "This value of tAtmOamVclStatsOtherCellsRxd indicates 
            the number of oam cells that are received but not 
            identified."
        ::= { tAtmOamVclStatisticsEntry 8 }  
           
--
--  Alcatel-Lucent SROS series AAL-5 VCC Statistics Table
--
tAal5VccStatisticsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF TAal5VccStatisticsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "tAal5VccStatisticsTable is used to gather AAL5-level statistics 
         on a particular AAL5 VCC entry in the RFC 2515 AToM MIB."
    ::= { tAal5VccObjs 1 }
    
    tAal5VccStatisticsEntry OBJECT-TYPE
        SYNTAX        TAal5VccStatisticsEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION 
            "An entry in the tAal5VccStatisticsTable containing statistics 
             information applicable to a particular AAL5 VCC entry in the 
             AToM MIB."
        AUGMENTS { aal5VccEntry }
        ::= { tAal5VccStatisticsTable 1 }

    TAal5VccStatisticsEntry ::=
        SEQUENCE {
            tAal5VccStatsPacketsRxd          Counter64,
            tAal5VccStatsPacketsTxd          Counter64,
            tAal5VccStatsDrpPacketsRxd       Counter64,
            tAal5VccStatsDrpPacketsTxd       Counter64
        }    

    tAal5VccStatsPacketsRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAal5VccStatsPacketsRxd indicates the 
            number of valid AAL-5 SDUs and AAL-5 SDUs with 
            CRC-32 errors received by the AAL-5 VCC."
        ::= { tAal5VccStatisticsEntry 1 } 

    tAal5VccStatsPacketsTxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAal5VccStatsPacketsTxd indicates the number of 
            AAL-5 SDUs transmitted by the AAL-5 VCC."
        ::= { tAal5VccStatisticsEntry 2 }
        
    tAal5VccStatsDrpPacketsRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAal5VccStatsDrpPacketsRxd indicates the number 
            of dropped AAL-5 SDUs that have been received on the AAL-5 VCC."
        ::= { tAal5VccStatisticsEntry 3 }         

    tAal5VccStatsDrpPacketsTxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAal5VccStatsDrpPacketsTxd indicates the number 
            of dropped AAL-5 SDUs that would have been transmitted on the 
            AAL-5 VCC."
        ::= { tAal5VccStatisticsEntry 4 }  

--
--  Alcatel-Lucent SROS series ATM Cell VCC Statistics Table
--
tAtmCellVclStatisticsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF TAtmCellVclStatisticsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "tAtmCellVclStatisticsTable is used to gather cell-level statistics 
         on a particular VCC entry in the RFC 2515 AToM MIB."
    ::= { tAtmCellVclObjs 1 }
    
    tAtmCellVclStatisticsEntry OBJECT-TYPE
        SYNTAX        TAtmCellVclStatisticsEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION 
            "An entry in the tAtmCellVclStatisticsTable containing statistics 
             information applicable to a particular VCL entry 
             in the AToM MIB."
        AUGMENTS { atmVclEntry }
        ::= { tAtmCellVclStatisticsTable 1 }

    TAtmCellVclStatisticsEntry ::=
        SEQUENCE {
            tAtmCellVclStatsClp0CellsRxd        Counter64,
            tAtmCellVclStatsClp0CellsTxd        Counter64,
            tAtmCellVclStatsDrpCellsRxd         Counter32,
            tAtmCellVclStatsDrpClp0CellsRxd     Counter32,
            tAtmCellVclStatsDrpClp0CellsTxd     Counter32,
            tAtmCellVclStatsTagCells            Counter32
        }

    tAtmCellVclStatsClp0CellsRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCellVclStatsClp0CellsRxd indicates the 
            number of valid ATM CLP=0 cells received by the VCL."
        ::= { tAtmCellVclStatisticsEntry 1 } 

    tAtmCellVclStatsClp0CellsTxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCellVclStatsClp0CellsTxd indicates the 
            number of valid ATM CLP=0 cells transmitted by the VCL."
        ::= { tAtmCellVclStatisticsEntry 2 }

    tAtmCellVclStatsDrpCellsRxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCellVclStatsDrpCellsRxd indicates the 
            number of all policer cells discards (CLP=0+1) of the VCL. 
            This excludes any buffer management discards (if 
            applicable)." 
        ::= { tAtmCellVclStatisticsEntry 3 } 

    tAtmCellVclStatsDrpClp0CellsRxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCellVclStatsDrpClp0CellsRxd indicates the 
            number of all policer CLP=0 cells discards of the VCL. This 
            excludes any buffer management discards (if applicable)." 
        ::= { tAtmCellVclStatisticsEntry 4 } 

    tAtmCellVclStatsDrpClp0CellsTxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCellVclStatsDrpClp0CellsTxd indicates the 
            number of all CLP=0 cells discards of this VCL. This includes 
            both discards due to buffer management and policer."
        ::= { tAtmCellVclStatisticsEntry 5 } 

    tAtmCellVclStatsTagCells OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCellVclStatsTagCells indicates the 
            number of tagged CLP=0 cells of the VCL. The egress may or 
            may not discard these cells."
        ::= { tAtmCellVclStatisticsEntry 6 } 

--
--  Alcatel-Lucent SROS series ATM VPL Info Table
--
--  Augmententation of atmVplTable in ATM-MIB
--
--  The tAtmVplInfoTable is an augmentation of the atmVplTable.
--  Use of AUGMENTS clause implies a one-to-one dependent relationship between
--  the base table, atmVplTable, and the augmenting table, tAtmVplInfoTable. 
--  This in effect extends the atmVplTable with additional columns.  
--  Creation (or deletion) of a row in the atmVplTable results in the same 
--  fate for the row in the tAtmVplInfoTable

tAtmVplInfoTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF TAtmVplInfoEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The tAtmVplInfoTable is used to display non-configuration
         information on a particular VPL entry in the RFC 2515 AToM MIB."
    ::= { tAtmVplObjs 1 }
    
    tAtmVplInfoEntry OBJECT-TYPE
        SYNTAX        TAtmVplInfoEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION 
            "An entry in the tAtmVplInfoTable containing non-configuration
             information applicable to a particular VPL entry in the 
             AToM MIB."
        AUGMENTS { atmVplEntry }
        ::= { tAtmVplInfoTable 1 }
    
    TAtmVplInfoEntry ::=
        SEQUENCE {
           tAtmVplInfoOwner         AtmConnectionOwner,
           tAtmVplInfoOamStatus     AtmOamStatus,
           tAtmVplInfoIlmiStatus    AtmIlmiStatus
        }

    tAtmVplInfoOwner OBJECT-TYPE
        SYNTAX       AtmConnectionOwner
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVplInfoOwner indicates which application
            caused the creation of the ATM VPL."
        ::= { tAtmVplInfoEntry 1 }   

    tAtmVplInfoOamStatus OBJECT-TYPE
        SYNTAX       AtmOamStatus
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVplInfoOamStatus indicates the OAM operational
            status of the VPL."
        ::= { tAtmVplInfoEntry 2 }   

    tAtmVplInfoIlmiStatus OBJECT-TYPE
        SYNTAX       AtmIlmiStatus   
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVplInfoIlmiStatus indicates the ILMI status of 
            the VPL. "
        ::= { tAtmVplInfoEntry 3 }    

--
--  Alcatel-Lucent SROS series ATM VPL Statistics Table
--

tAtmVplStatisticsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF TAtmVplStatisticsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The tAtmVplStatisticsTable is used to gather cell-level 
         statistics on a particular VPL entry in the RFC 2515 AToM MIB."
    ::= { tAtmVplObjs 2 }
    
    tAtmVplStatisticsEntry OBJECT-TYPE
        SYNTAX        TAtmVplStatisticsEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION 
            "An entry in the tAtmVplStatisticsTable containing statistics 
             information applicable to a particular VPL entry in the 
             AToM MIB."
        INDEX  { ifIndex, atmVplVpi}
        ::= { tAtmVplStatisticsTable 1 }
    
    TAtmVplStatisticsEntry ::=
        SEQUENCE {
           tAtmVplStatsTotalCellsRxd       Counter64,
           tAtmVplStatsTotalClp0CellsRxd   Counter64,
           tAtmVplStatsTotalCellsTxd       Counter64,
           tAtmVplStatsTotalClp0CellsTxd   Counter64,
           tAtmVplStatsTotalBytesRxd       Counter64,           
           tAtmVplStatsTotalBytesTxd       Counter64,
           tAtmVplStatsDrpCellsRxd         Counter32,
           tAtmVplStatsDrpClp0CellsRxd     Counter32,
           tAtmVplStatsDrpClp0CellsTxd     Counter32,
           tAtmVplStatsTagCells            Counter32
        }

    tAtmVplStatsTotalCellsRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVplStatsTotalCellsRxd indicates the 
            number of valid ATM cells received by the 
            VPL including both CLP=0 and CLP=1 cells.  
            If traffic policing is implemented, then cells are counted 
            prior to the application of traffic policing."
        ::= { tAtmVplStatisticsEntry 1 }      

    tAtmVplStatsTotalClp0CellsRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVplStatsTotalClp0CellsRxd indicates the 
            number of valid ATM CLP=0 cells received by the VPL.
            If traffic policing is implemented, then cells are counted 
            prior to the application of traffic policing."
        ::= { tAtmVplStatisticsEntry 2 } 
        
    tAtmVplStatsTotalCellsTxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVplStatsTotalCellsTxd indicates the 
            number of valid ATM cells transmitted by the 
            VPL including both CLP=0 and CLP=1 cells.  
            If traffic policing is implemented, then cells are counted 
            prior to the application of traffic policing."
        ::= { tAtmVplStatisticsEntry 3 }    

    tAtmVplStatsTotalClp0CellsTxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVplStatsTotalClp0CellsTxd indicates the 
            number of valid ATM CLP=0 cells transmitted by the VPL.
            If traffic policing is implemented, then cells are counted 
            prior to the application of traffic policing."
        ::= { tAtmVplStatisticsEntry 4 }

    tAtmVplStatsTotalBytesRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVplStatsTotalBytesRxd indicates the number of 
            bytes received by this VPL. This is the number of 
            tAtmVplStatsTotalCellsRxd multiplied by 53."
        ::= { tAtmVplStatisticsEntry 5 }

    tAtmVplStatsTotalBytesTxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVplStatsTotalBytesTxd indicates the number of 
            bytes transmitted by this VPL. This is the number of 
            tAtmVplStatsTotalCellsTxd multiplied by 53."
        ::= { tAtmVplStatisticsEntry 6 } 

    tAtmVplStatsDrpCellsRxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVplStatsDrpCellsRxd indicates the 
            number of all policer cells discards (CLP=0+1) of the VPL. 
            This excludes any buffer management discards (if 
            applicable)." 
        ::= { tAtmVplStatisticsEntry 7 } 

    tAtmVplStatsDrpClp0CellsRxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVplStatsDrpClp0CellsRxd indicates the 
            number of all policer CLP=0 cells discards of the VPL. This 
            excludes any buffer management discards (if applicable)." 
        ::= { tAtmVplStatisticsEntry 8 } 

    tAtmVplStatsDrpClp0CellsTxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVplStatsDrpClp0CellsTxd indicates the 
            number of all CLP=0 cells discards of this VPL. This includes 
            both discards due to buffer management and policer."
        ::= { tAtmVplStatisticsEntry 9 } 

    tAtmVplStatsTagCells OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVplStatsTagCells indicates the 
            number of tagged CLP=0 cells of the VPL. The egress may or 
            may not discard these cells."
        ::= { tAtmVplStatisticsEntry 10 }

tAtmOamVplStatisticsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF TAtmOamVplStatisticsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The tAtmOamVplStatisticsTable is used to gather oam 
         statistics on a particular VPL entry in the RFC 2515 AToM MIB."
    ::= { tAtmVplObjs 3 }
    
    tAtmOamVplStatisticsEntry OBJECT-TYPE
        SYNTAX        TAtmOamVplStatisticsEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION 
            "An entry in the tAtmVplStatisticsTable containing statistics 
             information applicable to a particular VPL entry in the 
             AToM MIB."
        INDEX  { ifIndex, atmVplVpi}
        ::= { tAtmOamVplStatisticsTable 1 }
    
    TAtmOamVplStatisticsEntry ::=
        SEQUENCE {
           tAtmOamVplStatsAISCellsTxd      Counter32,
           tAtmOamVplStatsRDICellsTxd      Counter32,
           tAtmOamVplStatsLoopbackCellsTxd Counter32,
           tAtmOamVplStatsAISCellsRxd      Counter32,
           tAtmOamVplStatsRDICellsRxd      Counter32,
           tAtmOamVplStatsLoopbackCellsRxd Counter32,
           tAtmOamVplStatsCrc10Errors      Counter32,
           tAtmOamVplStatsOtherCellsRxd    Counter32
        }
     
   tAtmOamVplStatsAISCellsTxd OBJECT-TYPE
        SYNTAX       Counter32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmOamVplStatsAISCellsTxd indicates the 
            number of AIS cells transmitted on this VPL for 
            both end to end and segment."
        ::= { tAtmOamVplStatisticsEntry 1 }      
   
   tAtmOamVplStatsRDICellsTxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmOamVplStatsRDICellsTxd indicates the 
            number of RDI cells transmitted on this VPL for 
            both end to end and segment."
        ::= { tAtmOamVplStatisticsEntry 2 }         
        
   tAtmOamVplStatsLoopbackCellsTxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmOamVplStatsLoopbackCellsTxd indicates
            the number of loopback requests and responses transmitted 
            on this VPL for both end to end and segment."
        ::= { tAtmOamVplStatisticsEntry 3 }  

   tAtmOamVplStatsAISCellsRxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmOamVplStatsAISCellsRxd indicates the 
            number of AIS cells received on this VPL for 
            both end to end and segment."
        ::= { tAtmOamVplStatisticsEntry 4 }      
   
   tAtmOamVplStatsRDICellsRxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmOamVplStatsRDICellsRxd indicates the 
            number of RDI cells received on this VPL for 
            both end to end and segment."
        ::= { tAtmOamVplStatisticsEntry 5 }         
        
   tAtmOamVplStatsLoopbackCellsRxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmOamVplStatsLoopbackCellsRxd indicates
            the number of loopback requests and responses received 
            on this VPL for both end to end and segment."
        ::= { tAtmOamVplStatisticsEntry 6 }  
   
   tAtmOamVplStatsCrc10Errors OBJECT-TYPE
        SYNTAX       Counter32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmOamVplStatsCrc10Errors indicates 
            the number of OAM cells discarded on this VPL with CRC 10 
            errors."
        ::= { tAtmOamVplStatisticsEntry 7 }  

   tAtmOamVplStatsOtherCellsRxd OBJECT-TYPE
        SYNTAX       Counter32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "This value of tAtmOamVplStatsOtherCellsRxd indicates 
            the number of OAM cells that are received on this VPL but not 
            identified."
        ::= { tAtmOamVplStatisticsEntry 8 }   

--
--  Alcatel-Lucent SROS series ATM VTL Info Table
--
--  A Virtual Trunk (VT) connection is a range of Virtual Paths (VPs). 

tAtmVtlInfoTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF TAtmVtlInfoEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The tAtmVtlInfoTable is used to display non-configuration
         information on a particular VTL entry."
    ::= { tAtmVtlObjs 1 }
    
    tAtmVtlInfoEntry OBJECT-TYPE
        SYNTAX        TAtmVtlInfoEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION 
            "An entry in the tAtmVtlInfoTable containing non-configuration
             information applicable to a particular VTL entry."
        INDEX  { ifIndex, tAtmVtlStartVpi, tAtmVtlEndVpi }
        ::= { tAtmVtlInfoTable 1 }
    
    TAtmVtlInfoEntry ::=
        SEQUENCE {
           tAtmVtlStartVpi                  AtmVpIdentifier,
           tAtmVtlEndVpi                    AtmVpIdentifier,
           tAtmVtlAdminStatus               AtmVorXAdminStatus,
           tAtmVtlOperStatus                AtmVorXOperStatus,
           tAtmVtlLastChange                AtmVorXLastChange,
           tAtmVtlReceiveTrafficDescrIndex  AtmTrafficDescrParamIndex,
           tAtmVtlTransmitTrafficDescrIndex AtmTrafficDescrParamIndex,
           tAtmVtlRowStatus                 RowStatus,
           tAtmVtlCastType                  AtmConnCastType,
           tAtmVtlConnKind                  AtmConnKind,
           tAtmVtlInfoOwner                 AtmConnectionOwner
        }
        
    tAtmVtlStartVpi    OBJECT-TYPE
        SYNTAX         AtmVpIdentifier
        MAX-ACCESS     not-accessible
        STATUS         current
        DESCRIPTION
           "The starting VPI value of the VTL."
        ::= { tAtmVtlInfoEntry 1 }        

    tAtmVtlEndVpi      OBJECT-TYPE
        SYNTAX         AtmVpIdentifier
        MAX-ACCESS     not-accessible
        STATUS         current
        DESCRIPTION
           "The ending VPI value of the VTL."
        ::= { tAtmVtlInfoEntry 2 }          

    tAtmVtlAdminStatus  OBJECT-TYPE
        SYNTAX          AtmVorXAdminStatus
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmVtlAdminStatus specifies the desired
            administrative state of the VTL."
        ::= { tAtmVtlInfoEntry 3 }

    tAtmVtlOperStatus   OBJECT-TYPE
        SYNTAX          AtmVorXOperStatus
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmVtlOperStatus indicates the current operational status of 
            the VTL."
        ::= { tAtmVtlInfoEntry 4 }

    tAtmVtlLastChange   OBJECT-TYPE
        SYNTAX          AtmVorXLastChange
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmVtlLastChange indicates the value of sysUpTime at the 
            time this VTL entered its current operational state."
        ::= { tAtmVtlInfoEntry 5 }

    tAtmVtlReceiveTrafficDescrIndex  OBJECT-TYPE
        SYNTAX          AtmTrafficDescrParamIndex
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmVtlReceiveTrafficDescrIndex identifies the row
            in the atmTrafficDescrParamTable which
            applies to the receive direction of the VTL."
        ::= { tAtmVtlInfoEntry 6 }

    tAtmVtlTransmitTrafficDescrIndex  OBJECT-TYPE
        SYNTAX          AtmTrafficDescrParamIndex
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmVtlTransmitTrafficDescrIndex identifies the row
            in the atmTrafficDescrParamTable which
            applies to the transmit direction of the VTL."
        ::= { tAtmVtlInfoEntry 7 }

    tAtmVtlRowStatus    OBJECT-TYPE
        SYNTAX          RowStatus
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmVtlRowStatus indicates the current RowStatus of the VTL.
            Entries in the tAtmVtlInfoTable are created as a result of
            the creation of another system entity (such as a SAP). 
            Since entries in this table can not be created directly
            tAtmVtlRowStatus is read-only and will always be 'active'
            if the row exists."
        ::= { tAtmVtlInfoEntry 8 }  

    tAtmVtlCastType     OBJECT-TYPE
        SYNTAX          AtmConnCastType
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmVtlCastType indicates the connection topology type."
        DEFVAL { p2p }
        ::= { tAtmVtlInfoEntry 9 }

    tAtmVtlConnKind     OBJECT-TYPE
        SYNTAX          AtmConnKind
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
           "tAtmVtlConnKind indicates the use of call control."
        ::= { tAtmVtlInfoEntry 10 }

    tAtmVtlInfoOwner    OBJECT-TYPE
        SYNTAX          AtmConnectionOwner
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
            "The value of tAtmVtlInfoOwner indicates which application
             caused the creation of the ATM VTL."
        ::= { tAtmVtlInfoEntry 11 }   

--
--  Alcatel-Lucent SROS series ATM VTL Statistics Table
--

tAtmVtlStatisticsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF TAtmVtlStatisticsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The tAtmVtlStatisticsTable is used to gather cell-level 
         statistics on a particular VTL entry."
    ::= { tAtmVtlObjs 2 }
    
    tAtmVtlStatisticsEntry OBJECT-TYPE
        SYNTAX        TAtmVtlStatisticsEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION 
            "An entry in the tAtmVtlStatisticsTable containing statistics 
             information applicable to a particular VTL entry."
        INDEX  { ifIndex, tAtmVtlStartVpi, tAtmVtlEndVpi }
        ::= { tAtmVtlStatisticsTable 1 }
    
    TAtmVtlStatisticsEntry ::=
        SEQUENCE {
           tAtmVtlStatsTotalCellsRxd       Counter64,
           tAtmVtlStatsTotalClp0CellsRxd   Counter64,
           tAtmVtlStatsTotalCellsTxd       Counter64,
           tAtmVtlStatsTotalClp0CellsTxd   Counter64,
           tAtmVtlStatsTotalBytesRxd       Counter64,           
           tAtmVtlStatsTotalBytesTxd       Counter64,
           tAtmVtlStatsDrpCellsRxd         Counter32,
           tAtmVtlStatsDrpClp0CellsRxd     Counter32,
           tAtmVtlStatsDrpClp0CellsTxd     Counter32,
           tAtmVtlStatsTagCells            Counter32
        }

    tAtmVtlStatsTotalCellsRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVtlStatsTotalCellsRxd indicates the 
            number of valid ATM cells received by the 
            VTL including both CLP=0 and CLP=1 cells.  
            If traffic policing is implemented, then cells are counted 
            prior to the application of traffic policing."
        ::= { tAtmVtlStatisticsEntry 1 }      

    tAtmVtlStatsTotalClp0CellsRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVtlStatsTotalClp0CellsRxd indicates the 
            number of valid ATM CLP=0 cells received by the VTL.
            If traffic policing is implemented, then cells are counted 
            prior to the application of traffic policing."
        ::= { tAtmVtlStatisticsEntry 2 } 
        
    tAtmVtlStatsTotalCellsTxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVtlStatsTotalCellsTxd indicates the 
            number of valid ATM cells transmitted by the 
            VTL including both CLP=0 and CLP=1 cells.  
            If traffic policing is implemented, then cells are counted 
            prior to the application of traffic policing."
        ::= { tAtmVtlStatisticsEntry 3 }    

    tAtmVtlStatsTotalClp0CellsTxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVtlStatsTotalClp0CellsTxd indicates the 
            number of valid ATM CLP=0 cells transmitted by the VTL.
            If traffic policing is implemented, then cells are counted 
            prior to the application of traffic policing."
        ::= { tAtmVtlStatisticsEntry 4 }

    tAtmVtlStatsTotalBytesRxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVtlStatsTotalBytesRxd indicates the number of 
            bytes received by this VTL. This is the number of 
            tAtmVtlStatsTotalCellsRxd multiplied by 53."
        ::= { tAtmVtlStatisticsEntry 5 }

    tAtmVtlStatsTotalBytesTxd OBJECT-TYPE
        SYNTAX       Counter64 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVtlStatsTotalBytesTxd indicates the number of 
            bytes transmitted by this VTL. This is the number of 
            tAtmVtlStatsTotalCellsTxd multiplied by 53."
        ::= { tAtmVtlStatisticsEntry 6 } 

    tAtmVtlStatsDrpCellsRxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVtlStatsDrpCellsRxd indicates the 
            number of all policer cells discards (CLP=0+1) of the VTL. 
            This excludes any buffer management discards (if 
            applicable)." 
        ::= { tAtmVtlStatisticsEntry 7 } 

    tAtmVtlStatsDrpClp0CellsRxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVtlStatsDrpClp0CellsRxd indicates the 
            number of all policer CLP=0 cells discards of the VTL. This 
            excludes any buffer management discards (if applicable)." 
        ::= { tAtmVtlStatisticsEntry 8 } 

    tAtmVtlStatsDrpClp0CellsTxd OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVtlStatsDrpClp0CellsTxd indicates the 
            number of all CLP=0 cells discards of this VTL. This includes 
            both discards due to buffer management and policer."
        ::= { tAtmVtlStatisticsEntry 9 } 

    tAtmVtlStatsTagCells OBJECT-TYPE
        SYNTAX       Counter32 
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmVtlStatsTagCells indicates the 
            number of tagged CLP=0 cells of the VTL. The egress may or 
            may not discard these cells."
        ::= { tAtmVtlStatisticsEntry 10 }

--
--  Alcatel-Lucent SROS series ATM System Configuration Objects
--       
tAtmSysLlid        OBJECT-TYPE
    SYNTAX         AtmLlid 
    MAX-ACCESS     read-create 
    STATUS         current
    DESCRIPTION
        "The ATM LLID is the Loopback location ID that uniquely
         identifies the system for the ATM OAM Loopback purposes."
    DEFVAL         { '01000000000000000000000000000000'H }
    ::= { tAtmSystemObjs 1 }        

tAtmSysOamRetryUp  OBJECT-TYPE
    SYNTAX         INTEGER  (0..10)   
    MAX-ACCESS     read-create 
    STATUS         current
    DESCRIPTION
        "The value of tAtmSysOamRetryUp specifies the number of consecutive
         OAM loopback attempts that must succeed after the periodic attempt 
         before the endpoint will transition from the eteAisLoc state to up.
         A value of 0 means that the endpoint will transition to the up
         state immediately if the periodic loopback attempt succeeds."
    DEFVAL         { 2 }
    ::= { tAtmSystemObjs 2 }

tAtmSysOamRetryDown  OBJECT-TYPE
    SYNTAX         INTEGER  (0..10)   
    MAX-ACCESS     read-create 
    STATUS         current
    DESCRIPTION
        "The value of tAtmSysOamRetryDown specifies the number of consecutive
         OAM loopback attempts that must fail after the periodic attempt 
         before the endpoint will transition from the up state to eteAisLoc.
         A value of 0 means that the endpoint will transition to the eteAisLoc 
         state immediately if the periodic loopback attempt fails."
    DEFVAL         { 4 }
    ::= { tAtmSystemObjs 3 }

tAtmSysOamLoopbackPeriod OBJECT-TYPE
    SYNTAX         INTEGER  (1..40)   
    UNITS          "seconds"
    MAX-ACCESS     read-create 
    STATUS         current
    DESCRIPTION
        "The value of tAtmSysOamLoopbackPeriod specifies the number of 
         seconds between periodic loopback attempts on an ATM endpoint 
         that has periodic loopback enabled."
    DEFVAL         { 10 }
    ::= { tAtmSystemObjs 4 }


--
--  Alcatel-Lucent SROS series ATM ILMI Link Table
--
--  The tAtmIlmiLinkTable is used to store the ILMI link configuration 
--  Once a row in this table has been created, the tAtmIlmiLinkVpi and
--  tAtmIlmiLinkVci objects cannot be modified.  As well, the value of
--  tAtmIlmiLinkVci must be non-zero. VCI value of 3 and 4 is reserved 
--  for OAM purposes.
--

tAtmIlmiLinkTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF TAtmIlmiLinkEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "The tAtmIlmiLinkTable is used to configure ILMI Link attributes."
    ::= { tAtmIlmiLinkObjs 1 }

    tAtmIlmiLinkEntry  OBJECT-TYPE
        SYNTAX              TAtmIlmiLinkEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION         
            "An entry in the tAtmIlmiLinkTable containing additional 
             management information applicable to a particular ILMI link 
             on an ATM interface"
        INDEX { ifIndex }
        ::= { tAtmIlmiLinkTable 1 }

    TAtmIlmiLinkEntry ::=
        SEQUENCE {
            tAtmIlmiLinkRowStatus                   RowStatus,
            tAtmIlmiLinkLastChanged                 TimeStamp,
            tAtmIlmiLinkAdminStatus                 INTEGER,
            tAtmIlmiLinkOperStatus                  INTEGER,
            tAtmIlmiLinkVpi                         AtmVpIdentifier,
            tAtmIlmiLinkVci                         AtmVcIdentifier,
            tAtmIlmiLinkFsmState                    INTEGER,
            tAtmIlmiLinkReceiveTrafficDescrIndex    AtmTrafficDescrParamIndex,
            tAtmIlmiLinkTransmitTrafficDescrIndex   AtmTrafficDescrParamIndex,
            tAtmIlmiLinkEstablishConPollIntvl       Integer32,
            tAtmIlmiLinkCheckConPollIntvl           Integer32,
            tAtmIlmiLinkConPollInactFactor          Integer32,
            tAtmIlmiLinkUniType                     AtmIlmiLinkUniType,
            tAtmIlmiLinkDeviceType                  AtmIlmiLinkDeviceType,
            tAtmIlmiLinkVersion                     AtmIlmiLinkVersion,
            tAtmIlmiLinkImeType                     AtmIlmiLinkImeType,
            tAtmIlmiLinkNegotiatedVersion           AtmIlmiLinkVersion,
            tAtmIlmiLinkNegotiatedImeType           AtmIlmiLinkImeType,
            tAtmIlmiLinkNeighborIfIdentifier        INTEGER,
            tAtmIlmiLinkNeighborSystemIdentifier    OCTET STRING,
            tAtmIlmiLinkNeighborUniType             AtmIlmiLinkUniType,
            tAtmIlmiLinkNeighborDeviceType          AtmIlmiLinkDeviceType,
            tAtmIlmiLinkNeighborVersion             AtmIlmiLinkVersion,
            tAtmIlmiLinkNeighborMaxVpcs             INTEGER,
            tAtmIlmiLinkNeighborMaxVccs             INTEGER,
            tAtmIlmiLinkNeighborMaxVpiBits          INTEGER,
            tAtmIlmiLinkNeighborMaxVciBits          INTEGER
        }
 
    tAtmIlmiLinkRowStatus     OBJECT-TYPE
        SYNTAX         RowStatus
        MAX-ACCESS     read-create
        STATUS         current
        DESCRIPTION
            "tAtmIlmiLinkRowStatus is used to create, delete or
             modify a row in this table. "
        ::= { tAtmIlmiLinkEntry 1 }

        tAtmIlmiLinkLastChanged OBJECT-TYPE
        SYNTAX     TimeStamp
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "The value of tAtmIlmiLinkLastChanged indicates 
                 the sysUpTime value when this row was last modified."
        ::= { tAtmIlmiLinkEntry 2 }

    tAtmIlmiLinkAdminStatus OBJECT-TYPE
        SYNTAX       INTEGER {
                              enabled (1),
                              disabled (2)
                              }
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
            "The value of tAtmIlmiLinkAdminStatus specifies the 
             administrative status for the ILMI Link."
        DEFVAL { disabled }
        ::= { tAtmIlmiLinkEntry 3 }

    tAtmIlmiLinkOperStatus OBJECT-TYPE
        SYNTAX       INTEGER {
                              up (1),
                              down (2)
                              }
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The value of tAtmIlmiLinkOperStatus indicates the
             operational status of the ILMI Link."
        ::= { tAtmIlmiLinkEntry 4 }

    tAtmIlmiLinkVpi   OBJECT-TYPE
        SYNTAX        AtmVpIdentifier
        MAX-ACCESS    read-create
        STATUS        current
        DESCRIPTION
            "The value of tAtmIlmiLinkVpi specifies the VPI value 
             of the ILMI link.  Once this row has been created, 
             this value cannot be modified."
        DEFVAL { 0 }
        ::= { tAtmIlmiLinkEntry 5 }

    tAtmIlmiLinkVci   OBJECT-TYPE
        SYNTAX        AtmVcIdentifier
        MAX-ACCESS    read-create
        STATUS        current
        DESCRIPTION
           "The value of tAtmIlmiLinkVci specifies the VCI value 
            of the ILMI link.  This value cannot be zero.  
            Once this row has been created, this value cannot
            be modified."
        DEFVAL { 16 }
        ::= { tAtmIlmiLinkEntry 6 }

    tAtmIlmiLinkFsmState    OBJECT-TYPE
        SYNTAX       INTEGER { stopped(1),
                               linkFailing(2),
                               establishing(3),
                               configuring(4),
                               retrievingNetworkPrefixes(5),
                               registeringNetworkPrefixes(6),
                               retrievingAddresses(7),
                               registeringAddresses(8),
                               verifying(9) }
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIlmiLinkFsmState indicates the state 
            of the ILMI Finite State Machine associated
            with this interface."

        REFERENCE
           "ATM Forum, Integrated Local Management Interface
            (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
            September 1996, Appendix 1"
        ::= { tAtmIlmiLinkEntry 7 }

    tAtmIlmiLinkReceiveTrafficDescrIndex  OBJECT-TYPE
        SYNTAX         AtmTrafficDescrParamIndex
        MAX-ACCESS     read-create
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkReceiveTrafficDescrIndex
             specifies the value of the atmTrafficDescrParamIndex index  
             for the row of the ATM Traffic Descriptor Table 
             which applies to the receive direction of this ILMI link.
             This value cannot be zero."
        DEFVAL { 1 }
        ::= { tAtmIlmiLinkEntry 8 }

    tAtmIlmiLinkTransmitTrafficDescrIndex  OBJECT-TYPE
        SYNTAX         AtmTrafficDescrParamIndex
        MAX-ACCESS     read-create
        STATUS         current
        DESCRIPTION
           "The value of tAtmIlmiLinkTransmitTrafficDescrIndex
            specifies the value of the atmTrafficDescrParamIndex index
            for  the row of the ATM Traffic Descriptor Table which applies
            to the transmit direction of this ILMI link.
            This value cannot be zero."
        DEFVAL { 1 }
        ::= { tAtmIlmiLinkEntry 9 }

    tAtmIlmiLinkEstablishConPollIntvl    OBJECT-TYPE
        SYNTAX       Integer32 (0..255)
        UNITS        "seconds"
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
            "The value of tAtmIlmiLinkEstablishConPollIntvl specifies
             the amount of time S, in seconds,  between successive 
             transmissions of ILMI messages on this interface for the 
             purpose of detecting the establishment of ILMI connectivity."
        REFERENCE
            "ATM Forum, Integrated Local Management Interface
             (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
             September 1996, Section 8.3.1"
        DEFVAL { 1 }
        ::= { tAtmIlmiLinkEntry 10 }

    tAtmIlmiLinkCheckConPollIntvl    OBJECT-TYPE
        SYNTAX       Integer32 (1..255)
        UNITS        "seconds"
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
            "The value of tAtmIlmiLinkCheckConPollIntvl specifies
             the amount of time T, in seconds, between successive 
             transmissions of ILMI messages on this interface for the 
             purpose of detecting loss of ILMI connectivity.  
             The distinguished value zero disables ILMI connectivity 
             procedures on this interface."
        REFERENCE
            "ATM Forum, Integrated Local Management Interface
             (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
             September 1996, Section 8.3.1"
        DEFVAL { 5 }
        ::= { tAtmIlmiLinkEntry 11 }

    tAtmIlmiLinkConPollInactFactor    OBJECT-TYPE
        SYNTAX       Integer32 (1..255)
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
            "The value of tAtmIlmiLinkConPollInactFactor specifies the
             number K of consecutive polls on this interface for which no
             ILMI response message is received before ILMI connectivity is
             declared lost."
        REFERENCE
            "ATM Forum, Integrated Local Management Interface
             (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
             September 1996, Section 8.3.1"
        DEFVAL { 4 }
        ::= { tAtmIlmiLinkEntry 12 }

    tAtmIlmiLinkUniType    OBJECT-TYPE
        SYNTAX           AtmIlmiLinkUniType
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The value of tAtmIlmiLinkUniType indicates the UNI 
             type of either `public' or `private' to be
             advertised by ILMI from this end of the interface."
        REFERENCE
            "ATM Forum, Integrated Local Management Interface
             (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
             September 1996, Section 8.3.4.1"
        ::= { tAtmIlmiLinkEntry 13 }

    tAtmIlmiLinkDeviceType    OBJECT-TYPE
        SYNTAX       AtmIlmiLinkDeviceType
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The value of tAtmIlmiLinkDeviceType indicates the 
             device type of either `user' or `node' to be
             advertised by ILMI from this end of the interface."
        REFERENCE
            "ATM Forum, Integrated Local Management Interface
             (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
             September 1996, Section 8.3.4.1"
        ::= { tAtmIlmiLinkEntry 14 }

    tAtmIlmiLinkVersion    OBJECT-TYPE
        SYNTAX       AtmIlmiLinkVersion
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
            "The value of tAtmIlmiLinkVersion specifies the ILMI 
             version of either `3.1' or `4.0' to be advertised 
             by ILMI from this end of the interface. The configuration
             of version `3.0' is not allowed."
        REFERENCE
            "ATM Forum, Integrated Local Management Interface
             (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
             September 1996, Section 8.2.3.13"
        DEFVAL { version4point0 }
        ::= { tAtmIlmiLinkEntry 15 }

    tAtmIlmiLinkImeType    OBJECT-TYPE
        SYNTAX       AtmIlmiLinkImeType
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
           "The value of tAtmIlmiLinkImeType specifies the configured 
            IME type of either `User-Side' or `Network-Side'."
        REFERENCE
           "ATM Forum, Integrated Local Management Interface
            (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
            September 1996, Section 8.3.4.1"
        DEFVAL { userside }
        ::= { tAtmIlmiLinkEntry 16 }

    tAtmIlmiLinkNegotiatedVersion    OBJECT-TYPE
        SYNTAX       AtmIlmiLinkVersion
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The value of tAtmIlmiLinkNegotiatedVersion specifies 
             the ILMI version of either `3.0', `3.1' or `4.0' 
             negotiated with peer IME."
        REFERENCE
            "ATM Forum, Integrated Local Management Interface
             (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
             September 1996, Section 8.2.3.13"
        ::= { tAtmIlmiLinkEntry 17 }
 
    tAtmIlmiLinkNegotiatedImeType    OBJECT-TYPE
        SYNTAX       AtmIlmiLinkImeType
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmIlmiLinkNegotiatedImeType specifies the resulting
            IME type of either `User-Side' or `Network-Side' based on 
            local and remote UNI type and device type."
        REFERENCE
           "ATM Forum, Integrated Local Management Interface
            (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
            September 1996, Section 8.3.4.1"
        ::= { tAtmIlmiLinkEntry 18 }

    tAtmIlmiLinkNeighborIfIdentifier  OBJECT-TYPE
        SYNTAX       INTEGER  (0..2147483647)
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The value of tAtmIlmiLinkNeighborIfIdentifier indicates
             the interface identifier advertised by the peer IME.
             A value of 0 indicates that the value has not been
             received from the peer IME."
        REFERENCE
           "ATM Forum, Integrated Local Management Interface
            (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
            September 1996, Section 8.3.1"
        DEFVAL { 0 }
        ::= { tAtmIlmiLinkEntry 19 }

    tAtmIlmiLinkNeighborSystemIdentifier  OBJECT-TYPE
        SYNTAX       OCTET STRING  (SIZE (6))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The value of tAtmIlmiLinkNeighborSystemIdentifier indicates
             The system identifier advertised by the peer IME.
             A value of `0' indicates that the value has not been
             received from the peer IME."
        REFERENCE
           "ATM Forum, Integrated Local Management Interface
            (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
            September 1996, Section 8.3.1"
        DEFVAL { '00000000000000'H }
        ::= { tAtmIlmiLinkEntry 20 }

    tAtmIlmiLinkNeighborUniType    OBJECT-TYPE
        SYNTAX       AtmIlmiLinkUniType
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The value of tAtmIlmiLinkNeighborUniType indicates the
             UNI type of either `public' or `private' that is
             advertised by the peer IME.  A value of `undefined' 
             indicates that the value has not been received from the
             peer IME."
        REFERENCE
           "ATM Forum, Integrated Local Management Interface
            (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
            September 1996, Section 8.3.4.1"
        DEFVAL { undefined }
        ::= { tAtmIlmiLinkEntry 21 }

    tAtmIlmiLinkNeighborDeviceType    OBJECT-TYPE
        SYNTAX       AtmIlmiLinkDeviceType
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The value of tAtmIlmiLinkNeighborDeviceType indicates 
             the device type of either `user' or `node' that
             is advertised by the peer IME.  A value of `undefined' 
             indicates that the value has not been received from the
             peer IME."
        REFERENCE
           "ATM Forum, Integrated Local Management Interface
            (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
            September 1996, Section 8.3.4.1"
        DEFVAL { undefined }
        ::= { tAtmIlmiLinkEntry 22 }

    tAtmIlmiLinkNeighborVersion    OBJECT-TYPE
        SYNTAX       AtmIlmiLinkVersion
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The value of tAtmIlmiLinkNeighborVersion indicates the 
             ILMI version of either `3.0', `3.1' or `4.0' that
             is advertised by the peer IME.  A value of `undefined' 
             indicates that the value has not been received from the
             peer IME."
        REFERENCE
           "ATM Forum, Integrated Local Management Interface
            (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
            September 1996, Section 8.2.3.13"
        DEFVAL { undefined }
        ::= { tAtmIlmiLinkEntry 23 }

    tAtmIlmiLinkNeighborMaxVpcs OBJECT-TYPE
        SYNTAX         INTEGER  (0..4096)
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
           "The value of tAtmIlmiLinkNeighborMaxVpcs indicates the
            maximum number of VPCs that can be supported by the neighbor.
            If the interface does not negotiate with its peer
            to determine the number of VPCs that can be
            configured on the interface, then the value of
            this object must equal 0."
        REFERENCE
           "ATM Forum, Integrated Local Management Interface
            (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
            September 1996, Section 8.2.3.4"
        DEFVAL { 0 }
        ::= { tAtmIlmiLinkEntry 24 }

     tAtmIlmiLinkNeighborMaxVccs OBJECT-TYPE
        SYNTAX         INTEGER  (0..65536)
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
           "The value of tAtmIlmiLinkNeighborMaxVccs indicates the
            maximum number of VCCs that can be supported by the neighbor.
            If the interface does not negotiate with its peer
            to determine the number of VCCs that can be
            configured on the interface, then the value of
            this object must equal 0."
        REFERENCE
           "ATM Forum, Integrated Local Management Interface
            (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
            September 1996, Section 8.2.3.5"
        DEFVAL { 0 }
        ::= { tAtmIlmiLinkEntry 25 }

    tAtmIlmiLinkNeighborMaxVpiBits OBJECT-TYPE
        SYNTAX         INTEGER  (0..12)
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
           "The value of tAtmIlmiLinkNeighborMaxVpiBits indicates
            the maximum number of VPI bits that can be supported
            by the neighbor.
            If the interface does not negotiate with its peer
            to determine the number of VPI bits that can be
            configured on the interface, then the value of
            this object must equal 0."
        REFERENCE
           "ATM Forum, Integrated Local Management Interface
            (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
            September 1996, Section 8.2.3.2"
        DEFVAL { 0 }
        ::= { tAtmIlmiLinkEntry 26 }

     tAtmIlmiLinkNeighborMaxVciBits OBJECT-TYPE
        SYNTAX         INTEGER  (0..16)
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
           "The value of tAtmIlmiLinkNeighborMaxVciBits indicates
            the maximum number of VCI bits that can be supported
            by the neighbor.
            If the interface does not negotiate with its peer
            to determine the number of VCI bits that can be
            configured on the interface, then the value of
            this object must equal 0."
        REFERENCE
           "ATM Forum, Integrated Local Management Interface
            (ILMI) Specification, Version 4.0, af-ilmi-0065.000,
            September 1996, Section 8.2.3.3"
        DEFVAL { 0 }
        ::= { tAtmIlmiLinkEntry 27 }


--
--  Alcatel-Lucent SROS series ATM ILMI Link Statistics Table
--
--  The tAtmIlmiLinkTable is used to store the ILMI link statistics. 
--  All the objects in this table are read only.
--

tAtmIlmiLinkStatisticsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF TAtmIlmiLinkStatisticsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The tAtmIlmiLinkStatisticsTable is used to gather statistics on a 
         particular ILMI Link."

    ::= { tAtmIlmiLinkObjs 2 }

    tAtmIlmiLinkStatisticsEntry   OBJECT-TYPE
        SYNTAX        TAtmIlmiLinkStatisticsEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION         
            "An entry in the tAtmIlmiLinkStatisticsTable containing 
             statistics information applicable to a particular ILMI 
             link on an ATM interface."
        INDEX { ifIndex }
        ::= { tAtmIlmiLinkStatisticsTable 1 }

    TAtmIlmiLinkStatisticsEntry ::=
        SEQUENCE {
            tAtmIlmiLinkOutPdus                           Counter32,
            tAtmIlmiLinkOutGetRequestPdus                 Counter32,
            tAtmIlmiLinkOutGetNextRequestPdus             Counter32,
            tAtmIlmiLinkOutSetRequestPdus                 Counter32,
            tAtmIlmiLinkOutGetResponsePdus                Counter32,
            tAtmIlmiLinkOutTrapPdus                       Counter32,
            tAtmIlmiLinkOutTooBigErrors                   Counter32,
            tAtmIlmiLinkOutNoSuchNameErrors               Counter32,
            tAtmIlmiLinkOutBadValueErrors                 Counter32,
            tAtmIlmiLinkOutReadOnlyErrors                 Counter32,
            tAtmIlmiLinkOutGeneralErrors                  Counter32,
            tAtmIlmiLinkInPdus                            Counter32,
            tAtmIlmiLinkInGetRequestPdus                  Counter32,
            tAtmIlmiLinkInGetNextRequestPdus              Counter32,
            tAtmIlmiLinkInSetRequestPdus                  Counter32,
            tAtmIlmiLinkInGetResponsePdus                 Counter32,
            tAtmIlmiLinkInTrapPdus                        Counter32,
            tAtmIlmiLinkInTooBigErrors                    Counter32,
            tAtmIlmiLinkInNoSuchNameErrors                Counter32,
            tAtmIlmiLinkInBadValueErrors                  Counter32,
            tAtmIlmiLinkInReadOnlyErrors                  Counter32,
            tAtmIlmiLinkInGeneralErrors                   Counter32,
            tAtmIlmiLinkInInvalidSnmpVersionPdus          Counter32,
            tAtmIlmiLinkInInvalidSnmpCommunityStringPdus  Counter32,
            tAtmIlmiLinkInInvalidSnmpFormatPdus           Counter32
        }
       
    tAtmIlmiLinkOutPdus    OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkOutPdus indicates the total 
             number SNMP PDUs sent on this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 1 }

    tAtmIlmiLinkOutGetRequestPdus   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkOutGetRequestPdus indicates 
             the total number GetRequest SNMP PDUs sent on this
             ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 2 }
 
    tAtmIlmiLinkOutGetNextRequestPdus   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkOutGetNextRequestPdus indicates
             the total number GetNextRequest SNMP PDUs sent on this
             ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 3 }

    tAtmIlmiLinkOutSetRequestPdus   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkOutSetRequestPdus indicates
             the total number 'SetRequest' SNMP PDUs sent on this
             ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 4 }

    tAtmIlmiLinkOutGetResponsePdus   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkOutGetResponsePdus indicates
             the total number GetResponse SNMP PDUs sent on this
             ILMI link in response to GetRequest, GetNextRequest
             and 'SetRequests' received."
        ::= { tAtmIlmiLinkStatisticsEntry 5 }
             
    tAtmIlmiLinkOutTrapPdus   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkOutTrapPdus indicates
             the total number Trap SNMP PDUs sent on this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 6 }

    tAtmIlmiLinkOutTooBigErrors   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkOutTooBigErrors indicates
             the total number SNMP `TooBig' error messages sent on
             this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 7 }

    tAtmIlmiLinkOutNoSuchNameErrors   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkOutNoSuchNameErrors indicates
             the total number SNMP `NoSuchName' error messages sent on
             this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 8 }
    
    tAtmIlmiLinkOutBadValueErrors   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkOutBadValueErrors indicates
             the total number SNMP `BadValue' error messages sent on
             this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 9 }
     
     tAtmIlmiLinkOutReadOnlyErrors   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkOutReadOnlyErrors indicates
             the total number SNMP `ReadOnly' error messages sent on
             this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 10 }
 
     tAtmIlmiLinkOutGeneralErrors   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkOutGeneralErrors indicates
             the total number SNMP `General' error messages sent on
             this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 11 }

    tAtmIlmiLinkInPdus    OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkInPdus indicates
             the total number SNMP PDUs received on this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 12 }

    tAtmIlmiLinkInGetRequestPdus   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkInGetRequestPdus indicates
             the total number GetRequest SNMP PDUs received on this
             ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 13 }
 
    tAtmIlmiLinkInGetNextRequestPdus   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkInGetNextRequestPdus indicates
             the total number 'GetNextRequest' SNMP PDUs received on
             this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 14 }

    tAtmIlmiLinkInSetRequestPdus   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkInSetRequestPdus indicates
             the total number 'SetRequest' SNMP PDUs received on
             this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 15 }

    tAtmIlmiLinkInGetResponsePdus   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkInGetResponsePdus indicates
             the total number 'GetResponse' SNMP PDUs received on this
             ILMI link in response to 'GetRequest', 'GetNextRequest' and
             'SetRequests' sent."
        ::= { tAtmIlmiLinkStatisticsEntry 16 }
             
    tAtmIlmiLinkInTrapPdus   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkInTrapPdus indicates the
             total number Trap SNMP PDUs received on this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 17 }

    tAtmIlmiLinkInTooBigErrors   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkInTooBigErrors indicates
             the total number SNMP `TooBig' error messages received on
             this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 18 }

    tAtmIlmiLinkInNoSuchNameErrors   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkInNoSuchNameErrors indicates
             the total number SNMP `NoSuchName' error messages received on
             this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 19 }
    
    tAtmIlmiLinkInBadValueErrors   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkInBadValueErrors indicates
             the total number SNMP `BadValue' error messages received on
             this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 20 }
     
     tAtmIlmiLinkInReadOnlyErrors   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkInReadOnlyErrors indicates
             the total number SNMP `ReadOnly' error messages received on
             this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 21 }
 
     tAtmIlmiLinkInGeneralErrors   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkInGeneralErrors indicates
             the total number SNMP `General' error messages received on
             this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 22 }

     tAtmIlmiLinkInInvalidSnmpVersionPdus   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkInInvalidSnmpVersionPdus indicates
             the total number SNMP PDUs received with invalid version on
             this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 23 }

     tAtmIlmiLinkInInvalidSnmpCommunityStringPdus   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkInInvalidSnmpCommunityStringPdus
             indicates the total number SNMP PDUs received with invalid 
             community string on this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 24 }

     tAtmIlmiLinkInInvalidSnmpFormatPdus   OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmIlmiLinkInInvalidSnmpFormatPdus indicates
             the total number SNMP PDUs received with invalid ASN.1 format
             on this ILMI link."
        ::= { tAtmIlmiLinkStatisticsEntry 25 }

--
--  Alcatel-Lucent SROS series ATM TC Sublayer Table
--
--  The tAtmTCSublayerTable is used to retrive information about the  
--  Transmission Convergence Sublayer of an interface.
--

tAtmTCSublayerTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF TAtmTCSublayerEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "The tAtmTCSublayerTable contains the Transmission Convergence
        Sublayer data."
    ::= { tAtmTCSublayerObjs 1 }

tAtmTCSublayerEntry  OBJECT-TYPE
    SYNTAX              TAtmTCSublayerEntry
    MAX-ACCESS          not-accessible
    STATUS              current
    DESCRIPTION         
        "An entry in the tAtmTCSublayerEntry containing additional 
         management information about the Transmission Covergence
         Sublayer."
    AUGMENTS { atmInterfaceTCEntry }
    ::= { tAtmTCSublayerTable 1 }

    TAtmTCSublayerEntry ::=
        SEQUENCE {
            tAtmTCSublayerHecErrors         Counter32,
            tAtmTCSublayerHecErrorsFixed    Counter32
        }
 
    tAtmTCSublayerHecErrors     OBJECT-TYPE
        SYNTAX         Counter32
        MAX-ACCESS     read-only
        STATUS         current
        DESCRIPTION
            "The value of tAtmTCSublayerHecErrors 
            indicates the number of cells with uncorrectable 
            HEC Errors on this interface."
        ::= { tAtmTCSublayerEntry 1 }
    
    tAtmTCSublayerHecErrorsFixed OBJECT-TYPE
        SYNTAX       Counter32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmTCSublayerHecErrorsFixed
            indicates the number of cells with correctable HEC
            Errors on this interface."
        ::= { tAtmTCSublayerEntry 2 }

--
--  Alcatel-Lucent SROS series ATM Connection Profile Statistics Table
--

tAtmCpStatisticsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF TAtmCpStatisticsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The tAtmCpStatisticsTable is used to gather statistics on connection
         profiles assigned to interfaces."
    ::= { tAtmCpObjs 1 }

    tAtmCpStatisticsEntry OBJECT-TYPE
        SYNTAX        TAtmCpStatisticsEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION
            "An entry in the tAtmCpStatisticsTable contains statistics
             information applicable to a particular connection profile assigned
             to a particular interface."
        INDEX  { ifIndex, tmnxConnProfId }
        ::= { tAtmCpStatisticsTable 1 }

    TAtmCpStatisticsEntry ::=
        SEQUENCE {
           tAtmCpStatsTotalCellsRxd    Counter64,
           tAtmCpStatsTotalCellsRxdLo  Counter32,
           tAtmCpStatsTotalCellsRxdHi  Counter32,
           tAtmCpStatsTotalCellsTxd    Counter64,
           tAtmCpStatsTotalCellsTxdLo  Counter32,
           tAtmCpStatsTotalCellsTxdHi  Counter32,
           tAtmCpStatsClp0CellsRxd     Counter64,
           tAtmCpStatsClp0CellsRxdLo   Counter32,
           tAtmCpStatsClp0CellsRxdHi   Counter32,
           tAtmCpStatsClp0CellsTxd     Counter64,
           tAtmCpStatsClp0CellsTxdLo   Counter32,
           tAtmCpStatsClp0CellsTxdHi   Counter32,
           tAtmCpStatsDrpCellsRxd      Counter32,
           tAtmCpStatsDrpClp0CellsRxd  Counter32,
           tAtmCpStatsDrpClp0CellsTxd  Counter32,
           tAtmCpStatsTagCells         Counter32
        }

    tAtmCpStatsTotalCellsRxd OBJECT-TYPE
        SYNTAX       Counter64
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsTotalCellsRxd indicates the
            number of valid ATM cells received by the connection profile.
            If traffic policing is implemented, then cells are counted
            prior to the application of traffic policing. To obtain the byte
            count multiply tAtmCpStatsTotalCellsRxd by 53."
        ::= { tAtmCpStatisticsEntry 1 }

    tAtmCpStatsTotalCellsRxdLo OBJECT-TYPE
        SYNTAX       Counter32
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsTotalCellsRxdLo indicates the
            lower 32-bits of tAtmCpStatsTotalCellsRxd."
        ::= { tAtmCpStatisticsEntry 2 }

    tAtmCpStatsTotalCellsRxdHi OBJECT-TYPE
        SYNTAX       Counter32
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsTotalCellsRxdHi indicates the
            upper 32-bits of tAtmCpStatsTotalCellsRxd."
        ::= { tAtmCpStatisticsEntry 3 }

    tAtmCpStatsTotalCellsTxd OBJECT-TYPE
        SYNTAX       Counter64
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsTotalCellsTxd indicates the
            number of valid ATM cells transmitted by the connection profile.
            If traffic policing is implemented, then cells are counted
            prior to the application of traffic policing. To obtain the byte
            count multiply tAtmCpStatsTotalCellsTxd by 53."
        ::= { tAtmCpStatisticsEntry 4 }

    tAtmCpStatsTotalCellsTxdLo OBJECT-TYPE
        SYNTAX       Counter32
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsTotalCellsTxdLo indicates the
            lower 32-bits of tAtmCpStatsTotalCellsTxd."
        ::= { tAtmCpStatisticsEntry 5 }

    tAtmCpStatsTotalCellsTxdHi OBJECT-TYPE
        SYNTAX       Counter32
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsTotalCellsTxdHi indicates the
            upper 32-bits of tAtmCpStatsTotalCellsTxd."
        ::= { tAtmCpStatisticsEntry 6 }

    tAtmCpStatsClp0CellsRxd OBJECT-TYPE
        SYNTAX       Counter64
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsClp0CellsRxd indicates the
            number of valid ATM CLP=0 cells received by the connection profile."
        ::= { tAtmCpStatisticsEntry 7 }

    tAtmCpStatsClp0CellsRxdLo OBJECT-TYPE
        SYNTAX       Counter32
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsClp0CellsRxdLo indicates the
            lower 32-bits of tAtmCpStatsClp0CellsRxd."
        ::= { tAtmCpStatisticsEntry 8 }

    tAtmCpStatsClp0CellsRxdHi OBJECT-TYPE
        SYNTAX       Counter32
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsClp0CellsRxdHi indicates the
            upper 32-bits of tAtmCpStatsClp0CellsRxd."
        ::= { tAtmCpStatisticsEntry 9 }

    tAtmCpStatsClp0CellsTxd OBJECT-TYPE
        SYNTAX       Counter64
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsClp0CellsTxd indicates the
            number of valid ATM CLP=0 cells transmitted by the connection
            profile."
        ::= { tAtmCpStatisticsEntry 10 }

    tAtmCpStatsClp0CellsTxdLo OBJECT-TYPE
        SYNTAX       Counter32
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsClp0CellsTxdLo indicates the
            lower 32-bits of tAtmCpStatsClp0CellsTxd."
        ::= { tAtmCpStatisticsEntry 11 }

    tAtmCpStatsClp0CellsTxdHi OBJECT-TYPE
        SYNTAX       Counter32
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsClp0CellsTxdHi indicates the
            upper 32-bits of tAtmCpStatsClp0CellsTxd."
        ::= { tAtmCpStatisticsEntry 12 }

    tAtmCpStatsDrpCellsRxd OBJECT-TYPE
        SYNTAX       Counter32
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsDrpCellsRxd indicates the
            number of all policer cells discards (CLP=0+1) of the connection
            profile. This excludes any buffer management discards (if
            applicable)."
        ::= { tAtmCpStatisticsEntry 13 }

    tAtmCpStatsDrpClp0CellsRxd OBJECT-TYPE
        SYNTAX       Counter32
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsDrpClp0CellsRxd indicates the
            number of all policer CLP=0 cells discards of the connection
            profile. This excludes any buffer management discards (if
            applicable)."
        ::= { tAtmCpStatisticsEntry 14 }

    tAtmCpStatsDrpClp0CellsTxd OBJECT-TYPE
        SYNTAX       Counter32
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsDrpClp0CellsTxd indicates the
            number of all CLP=0 cells discards of this connection profile. This
            includes both discards due to buffer management and policer."
        ::= { tAtmCpStatisticsEntry 15 }

    tAtmCpStatsTagCells OBJECT-TYPE
        SYNTAX       Counter32
        UNITS        "cells"
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
           "The value of tAtmCpStatsTagCells indicates the number of
            tagged CLP=0 cells of the connection profile. The egress may or may
            not discard these cells."
        ::= { tAtmCpStatisticsEntry 16 }

--
--  Alcatel-Lucent SROS series ATM Notifications
--

tAtmTcSubLayerDown NOTIFICATION-TYPE
    OBJECTS {
        atmInterfaceTCAlarmState
    }
    STATUS  current
    DESCRIPTION
        "The tAtmTcSubLayerDown notification is generated 
         when the ATM interface indicates that the 
         TC Sublayer is currently in the 
         Loss of Cell Delineation (LCD) defect 
         maintenance state."
    ::= { tAtmNotifications 1 }

tAtmTcSubLayerClear NOTIFICATION-TYPE
    OBJECTS {
        atmInterfaceTCAlarmState
    }
    STATUS  current
    DESCRIPTION
        "The tAtmTcSubLayerClear notification is generated 
         when the ATM interface indicates that the 
         TC Sublayer is currently not in the 
         Loss of Cell Delineation (LCD) defect 
         maintenance state."
    ::= { tAtmNotifications 2 }

tAtmPlcpSubLayerDown NOTIFICATION-TYPE
    OBJECTS {
        atmInterfaceDs3PlcpAlarmState
    }
    STATUS  current
    DESCRIPTION
        "The tAtmPlcpSubLayerDown notification is generated 
         when the ATM interface indicates that PLCP is
         currently in the far end alarm or incoming LOF
         defect maintenance state."
    ::= { tAtmNotifications 3 }

tAtmPlcpSubLayerClear NOTIFICATION-TYPE
    OBJECTS {
        atmInterfaceDs3PlcpAlarmState
    }
    STATUS  current
    DESCRIPTION
        "The tAtmPlcpSubLayerClear notification is generated 
         when the ATM interface indicates that PLCP is
         currently not in the far end alarm or incoming LOF
         defect maintenance state."
    ::= { tAtmNotifications 4 }

tAtmEpOutOfPeerVpiOrVciRange NOTIFICATION-TYPE
    OBJECTS {
        atmInterfaceCurrentMaxVpiBits,
        atmInterfaceCurrentMaxVciBits,
        atmInterfaceMaxActiveVpiBits,
        atmInterfaceMaxActiveVciBits
    }
    STATUS          current
    DESCRIPTION     "The tAtmEpOutOfPeerVpiOrVciRange notification 
                     is sent whenever an ILMI link becomes 
                     operationally up and ATM EPs are configured on 
                     the ILMI-managed interface that are outside the 
                     VPI or VCI range allowed by the peer."
    ::= { tAtmNotifications 5 }

tAtmMaxPeerVccsExceeded NOTIFICATION-TYPE
    OBJECTS {
        tAtmIntfCurrentMaxVccs,
        atmInterfaceConfVccs
    }
    STATUS          current
    DESCRIPTION     "The tAtmMaxPeerVccsExceeded notification is sent 
                     whenever an ILMI link becomes operationally up 
                     and there are more ATM VCLs configured on the 
                     ILMI-managed interface than are supported by the 
                     peer."
    ::= { tAtmNotifications 6 }

tAtmMaxPeerVpcsExceeded NOTIFICATION-TYPE
    OBJECTS {
        tAtmIntfCurrentMaxVpcs,
        atmInterfaceConfVpcs
    }
    STATUS          current
    DESCRIPTION     "The tAtmMaxPeerVpcsExceeded notification is sent 
                     whenever an ILMI link becomes operationally up 
                     and there are more ATM VPLs configured on the 
                     ILMI-managed interface than are supported by the 
                     peer."
    ::= { tAtmNotifications 7 }

tAtmIlmiLinkStatusChange NOTIFICATION-TYPE
    OBJECTS {
        tAtmIlmiLinkAdminStatus,
        tAtmIlmiLinkOperStatus,
        tAtmIlmiLinkVpi,
        tAtmIlmiLinkVci
    }
    STATUS          current
    DESCRIPTION     "The tAtmIlmiLinkStatusChange notification is sent 
                     whenever a status change occurs on an ILMI link. 
                     This includes changes to the ILMI link's administrative
                     status and the ILMI link's operational status."
    ::= { tAtmNotifications 8 }

--
-- Conformance Information
--
tmnxAtmMIBCompliances OBJECT IDENTIFIER ::= { tAtmMIBConformance 1 }
tmnxAtmMIBGroups      OBJECT IDENTIFIER ::= { tAtmMIBConformance 2 }

-- compliance statements

-- tAtmMIBCompliance  MODULE-COMPLIANCE
--    ::= { tmnxAtmMIBCompliances 1 }

-- tAtmMIBV3v0Compliance  MODULE-COMPLIANCE
--    ::= { tmnxAtmMIBCompliances 2 }

tAtmMIBV4v0Compliance  MODULE-COMPLIANCE
    STATUS  obsolete
    DESCRIPTION
            "The compliance statement for revision 4.0 of TIMETRA-ATM-MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { 
            tmnxAtmIntfConfV4v0Group,
            tmnxAtmIntfStatsV4v0Group,
            tmnxAtmIfcInfoGroup,
            tmnxAtmVclInfoGroup,
            tmnxAtmVclStatisticsGroup,
            tmnxAtmAal5VccStatisticsGroup,
            tmnxAtmCellVclStatisticsGroup,
            tmnxAtmVplInfoGroup,
            tmnxAtmVplStatisticsGroup,
            tmnxAtmVtlInfoGroup,
            tmnxAtmVtlStatisticsGroup,
            tmnxAtmIfcStatisticsGroup,
            tmnxAtmSysConfV4v0Group,
            tmnxAtmIlmiLinkGroup,
            tmnxAtmIlmiStatisticsGroup,
            tmnxAtmTCSublayerGroup,
            tmnxAtmNotificationsR4r0Group
        }
    ::= { tmnxAtmMIBCompliances 3 }

tAtmMIBV9v0Compliance  MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for revision 9.0 of TIMETRA-ATM-MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { 
            tmnxAtmIntfConfV4v0Group,
            tmnxAtmIntfStatsV4v0Group,
            tmnxAtmIfcInfoGroup,
            tmnxAtmVclInfoGroup,
            tmnxAtmVclInfoGroupV9v0,
            tmnxAtmVclStatisticsGroup,
            tmnxAtmAal5VccStatisticsGroup,
            tmnxAtmCellVclStatisticsGroup,
            tmnxAtmVplInfoGroup,
            tmnxAtmVplStatisticsGroup,
            tmnxAtmVtlInfoGroup,
            tmnxAtmVtlStatisticsGroup,
            tmnxAtmIfcStatisticsGroup,
            tmnxAtmSysConfV4v0Group,
            tmnxAtmIlmiLinkGroup,
            tmnxAtmIlmiStatisticsGroup,
            tmnxAtmTCSublayerGroup,
            tmnxAtmNotificationsR4r0Group,
            tmnxAtmCpStatisticsGroup
        }
    ::= { tmnxAtmMIBCompliances 4 }

-- units of conformance

-- tmnxAtmMdaInfoGroup           OBJECT-GROUP
--    ::= { tmnxAtmMIBGroups 1 }

-- tmnxAtmIntfConfGroup      OBJECT-GROUP
--    ::= { tmnxAtmMIBGroups 2 }

-- tmnxAtmIntfStatsGroup      OBJECT-GROUP
--    ::= { tmnxAtmMIBGroups 3 }

tmnxAtmVclInfoGroup      OBJECT-GROUP
    OBJECTS   {
           tAtmVclInfoOwner,
           tAtmVclInfoOamStatus,
           tAtmVclInfoIlmiStatus
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of ATM VCL
         status information on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 6 }

tmnxAtmVclStatisticsGroup      OBJECT-GROUP
    OBJECTS   {
           tAtmVclStatsTotalCellsRxd,
           tAtmVclStatsTotalCellsTxd,
           tAtmVclStatsTotalBytesTxd,
           tAtmVclStatsTotalBytesRxd,
           tAtmOamVclStatsAISCellsTxd,      
           tAtmOamVclStatsRDICellsTxd,      
           tAtmOamVclStatsLoopbackCellsTxd, 
           tAtmOamVclStatsAISCellsRxd,      
           tAtmOamVclStatsRDICellsRxd,      
           tAtmOamVclStatsLoopbackCellsRxd, 
           tAtmOamVclStatsCrc10Err,
           tAtmOamVclStatsOtherCellsRxd
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of ATM VCL
         statistics on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 7 }

tmnxAtmAal5VccStatisticsGroup      OBJECT-GROUP
    OBJECTS   {
            tAal5VccStatsPacketsRxd,
            tAal5VccStatsPacketsTxd,
            tAal5VccStatsDrpPacketsRxd,
            tAal5VccStatsDrpPacketsTxd 
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of AAL-5
         VCC statistics on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 8 }       

tmnxAtmCellVclStatisticsGroup      OBJECT-GROUP
    OBJECTS   {
            tAtmCellVclStatsClp0CellsRxd,
            tAtmCellVclStatsClp0CellsTxd,
            tAtmCellVclStatsDrpCellsRxd,
            tAtmCellVclStatsDrpClp0CellsRxd,
            tAtmCellVclStatsDrpClp0CellsTxd,
            tAtmCellVclStatsTagCells
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of cell mode
         VCC statistics on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 9 }       

-- tmnxAtmNotificationsGroup      NOTIFICATION-GROUP
--    ::= { tmnxAtmMIBGroups 10 }  

tmnxAtmVplInfoGroup      OBJECT-GROUP
    OBJECTS   {
           tAtmVplInfoOwner,
           tAtmVplInfoOamStatus,
           tAtmVplInfoIlmiStatus
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of ATM VPL
         status information on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 11 }

tmnxAtmVplStatisticsGroup      OBJECT-GROUP
    OBJECTS   {
           tAtmVplStatsTotalCellsRxd,
           tAtmVplStatsTotalClp0CellsRxd,
           tAtmVplStatsTotalCellsTxd,
           tAtmVplStatsTotalClp0CellsTxd,
           tAtmVplStatsTotalBytesTxd,
           tAtmVplStatsTotalBytesRxd,           
           tAtmVplStatsDrpCellsRxd,
           tAtmVplStatsDrpClp0CellsRxd,
           tAtmVplStatsDrpClp0CellsTxd,
           tAtmVplStatsTagCells,           
           tAtmOamVplStatsAISCellsTxd,      
           tAtmOamVplStatsRDICellsTxd,      
           tAtmOamVplStatsLoopbackCellsTxd, 
           tAtmOamVplStatsAISCellsRxd,      
           tAtmOamVplStatsRDICellsRxd,      
           tAtmOamVplStatsLoopbackCellsRxd, 
           tAtmOamVplStatsCrc10Errors,
           tAtmOamVplStatsOtherCellsRxd
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of ATM VPL
         statistics on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 12 }

tmnxAtmVtlInfoGroup      OBJECT-GROUP
    OBJECTS   {
           tAtmVtlAdminStatus,
           tAtmVtlOperStatus,
           tAtmVtlLastChange,
           tAtmVtlReceiveTrafficDescrIndex,
           tAtmVtlTransmitTrafficDescrIndex,
           tAtmVtlRowStatus,
           tAtmVtlCastType,
           tAtmVtlConnKind,
           tAtmVtlInfoOwner           
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of ATM VTL
         status information on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 13 }

tmnxAtmVtlStatisticsGroup      OBJECT-GROUP
    OBJECTS   {
           tAtmVtlStatsTotalCellsRxd,
           tAtmVtlStatsTotalClp0CellsRxd,
           tAtmVtlStatsTotalCellsTxd,
           tAtmVtlStatsTotalClp0CellsTxd,
           tAtmVtlStatsTotalBytesTxd,
           tAtmVtlStatsTotalBytesRxd,           
           tAtmVtlStatsDrpCellsRxd,
           tAtmVtlStatsDrpClp0CellsRxd,
           tAtmVtlStatsDrpClp0CellsTxd,
           tAtmVtlStatsTagCells
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of ATM VTL
         statistics on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 14 }

tmnxAtmIfcInfoGroup      OBJECT-GROUP
    OBJECTS   {
           tAtmIfcAdminStatus,
           tAtmIfcOperStatus,
           tAtmIfcLastChange,
           tAtmIfcReceiveTrafficDescrIndex,
           tAtmIfcTransmitTrafficDescrIndex,
           tAtmIfcRowStatus,
           tAtmIfcCastType,
           tAtmIfcConnKind,
           tAtmIfcInfoOwner           
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of ATM IFC
         status information on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 15 }

tmnxAtmIfcStatisticsGroup      OBJECT-GROUP
    OBJECTS   {
           tAtmIfcStatsTotalCellsRxd,
           tAtmIfcStatsTotalClp0CellsRxd,
           tAtmIfcStatsTotalCellsTxd,
           tAtmIfcStatsTotalClp0CellsTxd,
           tAtmIfcStatsTotalBytesTxd,
           tAtmIfcStatsTotalBytesRxd,           
           tAtmIfcStatsDrpCellsRxd,
           tAtmIfcStatsDrpClp0CellsRxd,
           tAtmIfcStatsDrpClp0CellsTxd,
           tAtmIfcStatsTagCells
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of ATM IFC 
         statistics on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 16 }

tmnxAtmObsoleteV3v0Group           OBJECT-GROUP
    OBJECTS  {
          tAtmMdaMaxSupportedVpcs,
          tAtmMdaMaxSupportedVccs,
          tAtmMdaConfiguredVpcs,
          tAtmMdaConfiguredVccs
--          tAtmIntfCurrentMaxVpcs,
--          tAtmIntfCurrentMaxVccs
        }
    STATUS    current
    DESCRIPTION
        "The group of objects providing made obsolete in the 3.0 release"
    ::= { tmnxAtmMIBGroups 17 }

-- tmnxAtmIntfConfV3v0Group      OBJECT-GROUP
--    ::= { tmnxAtmMIBGroups 18 }

-- tmnxAtmSysConfGroup      OBJECT-GROUP
--    ::= { tmnxAtmMIBGroups 19 }

tmnxAtmIlmiLinkGroup           OBJECT-GROUP
    OBJECTS   {
        tAtmIlmiLinkRowStatus,
        tAtmIlmiLinkLastChanged,
        tAtmIlmiLinkAdminStatus,
        tAtmIlmiLinkOperStatus,
        tAtmIlmiLinkVpi,
        tAtmIlmiLinkVci,
        tAtmIlmiLinkFsmState,
        tAtmIlmiLinkReceiveTrafficDescrIndex,
        tAtmIlmiLinkTransmitTrafficDescrIndex,
        tAtmIlmiLinkEstablishConPollIntvl,
        tAtmIlmiLinkCheckConPollIntvl,
        tAtmIlmiLinkConPollInactFactor,
        tAtmIlmiLinkUniType,
        tAtmIlmiLinkDeviceType,
        tAtmIlmiLinkVersion,
        tAtmIlmiLinkImeType,
        tAtmIlmiLinkNegotiatedVersion,
        tAtmIlmiLinkNegotiatedImeType,
        tAtmIlmiLinkNeighborIfIdentifier,
        tAtmIlmiLinkNeighborSystemIdentifier,
        tAtmIlmiLinkNeighborUniType,
        tAtmIlmiLinkNeighborDeviceType,
        tAtmIlmiLinkNeighborVersion,
        tAtmIlmiLinkNeighborMaxVpcs,
        tAtmIlmiLinkNeighborMaxVccs,
        tAtmIlmiLinkNeighborMaxVpiBits,
        tAtmIlmiLinkNeighborMaxVciBits
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management of each ILMI
         link on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 20 }

tmnxAtmIlmiStatisticsGroup           OBJECT-GROUP
    OBJECTS   {
        tAtmIlmiLinkOutPdus,
        tAtmIlmiLinkOutGetRequestPdus,
        tAtmIlmiLinkOutGetNextRequestPdus,
        tAtmIlmiLinkOutSetRequestPdus,
        tAtmIlmiLinkOutGetResponsePdus,
        tAtmIlmiLinkOutTrapPdus,
        tAtmIlmiLinkOutTooBigErrors,
        tAtmIlmiLinkOutNoSuchNameErrors,
        tAtmIlmiLinkOutBadValueErrors,
        tAtmIlmiLinkOutReadOnlyErrors,
        tAtmIlmiLinkOutGeneralErrors,
        tAtmIlmiLinkInPdus,
        tAtmIlmiLinkInGetRequestPdus,
        tAtmIlmiLinkInGetNextRequestPdus,
        tAtmIlmiLinkInSetRequestPdus,
        tAtmIlmiLinkInGetResponsePdus,
        tAtmIlmiLinkInTrapPdus,
        tAtmIlmiLinkInTooBigErrors,
        tAtmIlmiLinkInNoSuchNameErrors,
        tAtmIlmiLinkInBadValueErrors,
        tAtmIlmiLinkInReadOnlyErrors,
        tAtmIlmiLinkInGeneralErrors,
        tAtmIlmiLinkInInvalidSnmpVersionPdus,
        tAtmIlmiLinkInInvalidSnmpCommunityStringPdus,
        tAtmIlmiLinkInInvalidSnmpFormatPdus 
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of ILMI
         statistics on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 21 }

tmnxAtmNotificationsR4r0Group      NOTIFICATION-GROUP
    NOTIFICATIONS {
       tAtmTcSubLayerDown,
       tAtmTcSubLayerClear,
       tAtmPlcpSubLayerDown,
       tAtmPlcpSubLayerClear,
       tAtmEpOutOfPeerVpiOrVciRange,
       tAtmMaxPeerVccsExceeded,
       tAtmMaxPeerVpcsExceeded,
       tAtmIlmiLinkStatusChange       
    }
    STATUS    current
    DESCRIPTION
        "The group of notifications providing for indications of ATM-related
         events on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 22 }  

tmnxAtmIntfConfV4v0Group      OBJECT-GROUP
    OBJECTS   {
        tAtmIntfCurrentMaxVpcs,
        tAtmIntfCurrentMaxVccs,
        tAtmIntfTotalIngrCbrBandwidth,
        tAtmIntfTotalIngrRtVbrBandwidth,
        tAtmIntfTotalIngrNrtVbrBandwidth,
        tAtmIntfTotalIngrUbrBandwidth,
        tAtmIntfTotalEgrCbrBandwidth,
        tAtmIntfTotalEgrRtVbrBandwidth,
        tAtmIntfTotalEgrNrtVbrBandwidth,
        tAtmIntfTotalEgrUbrBandwidth,
        tAtmIntfBandwidth,      
        tAtmIntfShapedBandwidth,
        tAtmIntfLastUnknVpi,
        tAtmIntfLastUnknVci,    
        tAtmIntfOperStatus,
        tAtmIntfConfVtcs,
        tAtmIntfConfIfcs
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management of each ATM interface
         on Alcatel-Lucent SROS series systems release 4.0."
    ::= { tmnxAtmMIBGroups 23 }

tmnxAtmSysConfV4v0Group      OBJECT-GROUP
    OBJECTS   {
           tAtmSysLlid,
           tAtmSysOamRetryUp,
           tAtmSysOamRetryDown,
           tAtmSysOamLoopbackPeriod
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of ATM system 
         level configurations on Alcatel-Lucent SROS series systems release 4.0."
    ::= { tmnxAtmMIBGroups 24 }

tmnxAtmIntfStatsV4v0Group      OBJECT-GROUP
    OBJECTS   {
          tAtmIntfStatsTotalCellsRxd,            
          tAtmIntfStatsTotalCellsTxd,            
          tAtmIntfStatsTotalBytesRxd,            
          tAtmIntfStatsTotalBytesTxd,                    
          tAtmIntfStatsTotalUnknCellsDrp, 
          tAtmIntfAal5StatsTotalPktsRxd,       
          tAtmIntfAal5StatsTotalPktsTxd,       
          tAtmIntfAal5StatsTotalPktsDrpRxd,
          tAtmIntfAal5StatsTotalPktsDrpTxd,
          tAtmIntfAal5StatsTotalCrc32Err          
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of ATM 
         interface statistics on Alcatel-Lucent SROS series systems release 4.0."
    ::= { tmnxAtmMIBGroups 25 }
        
tmnxAtmTCSublayerGroup      OBJECT-GROUP
    OBJECTS   {
           tAtmTCSublayerHecErrors,
           tAtmTCSublayerHecErrorsFixed
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of an ATM TC 
         Sublayer on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 26 }

tmnxAtmObsoleteV4v0Group           OBJECT-GROUP
    OBJECTS  {
          tAtmIntfStatsTotalHecErr,
          tAtmIntfStatsTotalHecErrFixed
        }
    STATUS    current
    DESCRIPTION
        "The group of objects providing made obsolete in the 4.0 release"
    ::= { tmnxAtmMIBGroups 27 }

tmnxAtmCpStatisticsGroup      OBJECT-GROUP
    OBJECTS   {
           tAtmCpStatsTotalCellsRxd,
           tAtmCpStatsTotalCellsRxdLo,
           tAtmCpStatsTotalCellsRxdHi,
           tAtmCpStatsTotalCellsTxd,
           tAtmCpStatsTotalCellsTxdLo,
           tAtmCpStatsTotalCellsTxdHi,
           tAtmCpStatsClp0CellsRxd,
           tAtmCpStatsClp0CellsRxdLo,
           tAtmCpStatsClp0CellsRxdHi,
           tAtmCpStatsClp0CellsTxd,
           tAtmCpStatsClp0CellsTxdLo,
           tAtmCpStatsClp0CellsTxdHi,
           tAtmCpStatsDrpCellsRxd,
           tAtmCpStatsDrpClp0CellsRxd,
           tAtmCpStatsDrpClp0CellsTxd,
           tAtmCpStatsTagCells
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of ATM CP
         statistics on Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 28 }

tmnxAtmVclInfoGroupV9v0      OBJECT-GROUP
    OBJECTS   {
           tAtmVclInfoRxTrafficDescrIdOvr,
           tAtmVclInfoTxTrafficDescrIdOvr
    }
    STATUS    current
    DESCRIPTION
        "The group of objects providing for management access of ATM VCL
         status information that were added in release 9.0 
         of Alcatel-Lucent SROS series systems."
    ::= { tmnxAtmMIBGroups 29 }

END

